Studio

Upgrade to Pro

Sign up

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

Мне нужно картинка балкона в разрезе в виде макета для последующего нанесения туда записей размеров уплотнителя в ширину, разных слоев See more

#architecture #technical drawing #construction #technical illustration

More images like this

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

Isometric exploded diagram of a wooden cupboard, showing its components for assembly.

A 3D isometric sketch of an industrial A-frame structure with chains and caster wheels, set in a workshop.

Line art drawing of a storage unit with shelves and drawers, in dark red outline on a light background.

A black and white technical drawing of a small greenhouse with measurements and labels for OSB and plastic sheathing.

Technical drawing of a multi-tiered wooden quail cage with mesh sides, feeder trays, and capacity labels.

Diagram of a bolt, lock washer, flat washer, and round sleeve, each labeled.

Close-up of a silver metal adjustable bracket bolted to a wooden post, supporting a horizontal wooden beam under a cloudy sky.

A sketch-style technical drawing of a rectangular box with internal shelves and labeled dimensions.

Illustrated shed with a sloped roof featuring solar panels, a garage door, and firewood under an overhang.

Architectural illustration of an attic bedroom cross-section with a raised bed, stairs, door, and a 1.70m height measurement.

A detailed architectural sketch of a covered outdoor walkway with transparent roof and panels, showing dimensions and structural elements.

An IKEA-style instruction manual showing steps to assemble a large IKEA store sign on a pole.

A physics diagram showing two wooden crates connected by a chain. Forces and masses are labeled: a 35 N horizontal force on the left crate, which has a mass of 6 kg, and vertical 5 N forces. The right crate has a mass of 4 kg and vertical 3 N forces. The background is a textured brown.

Isometric technical drawing of a movable wooden storage shelf on wheels with four rows of open-top bins and two rows of smaller closed bins. Dimensions are shown.

Technical sketch of a light plywood cat climbing and hiding shelf for a camper van, showing multiple views and ventilation.

A technical diagram illustrating the cross-section of a 20' x 38' chalet with two superimposed roofs, showing wool insulation, a vapor barrier, ventilation space, and air flow.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

Isometric technical drawing of a beach volleyball court under construction, showing ground preparation, excavation, and drainage pipes.

A detailed sketch of a square mahogany live edge table with metal corner accents, featuring prominent wood grain.

A metal hoe with a wooden handle rests against a grey pole, surrounded by other poles and water droplets on a light pink surface, in a 2D cartoon style.

An isometric sketch of a silver galvanized industrial A-frame structure with chains and caster wheels in a workshop.

Diagram of a pool wall with a ladder, a chair, and dimensions in cm, in a clean, illustrative style.

A 3D render of a wooden timber frame layout with two large audio speakers inside on stands.

Illustration of two poles, 50m and 1m tall, 1m apart, with an 80m sagging rope between their tops in a field.

An exploded diagram of a wooden desk with a top, two drawers, and legs, surrounded by various metal bolts and rods, against a light background.

A technical diagram of a wooden cooling pad enclosure with two fans, a control module, and an adapter connection, showing dimensions and labels.

A pencil drawing of a Fink truss structure with a 7:12 pitch and a 9-foot span.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

Black and white line art illustration of a CNC router carving a swirling pattern into wood.

Technical illustration of a no-drill surface mounting system with labeled components.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

A hand-drawn sketch of a modern backyard with a wooden deck, a blue swimming pool, and green landscaping.

Hand-drawn isometric sketch of a Minecraft cauldron with water ripples, a dripstone block above, and a falling water drop.

Illustration of a wooden and metal kitchen island with an integrated sink, showing dimensions of 48" L x 24" W x 36" H.

An isometric sketch of a corner room featuring a wooden paneled wall with a hinged door and a cinder block wall with a sliding glass door. Dimensions are marked on the floor.

Cartoon illustration showing a wooden bench transforming into a picnic table with a latch mechanism.

A detailed technical sketch of a rectangular box or cabinet with a single internal shelf, showing various dimensions and measurements with arrows.

A detailed blueprint drawing of a metal door, complete with dimensions and labels, on a gridded background.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

Pencil sketch of a modern bathroom shower with a glass enclosure, a knee wall, and a built-in bench.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

A technical line drawing illustrating the construction details of a Rouge valley roof, including flashing, jack rafters, and valley rafters.

Five-step illustrated guide for applying edge banding to wood, showing hands using an iron and trimming edges.

A schematic illustration of two large industrial tanks. One tank on the left is filled with water and labeled '650 L'. The tank on the right is empty except for several concrete samples at its base and is labeled '100.mn'. A hose connects a submersible pump in each tank to the other tank.

A drawing of a raised wooden deck with decorative black metal railings, in a sketch art style.

A monochrome technical drawing of a wooden container with six compartments filled with bolts, showing dimensions.

Technical drawing of an oak soffit ventilator with dimensions and routed grille details.

Technical illustration of a half umbrella canopy with a pulley system and a round pole on a blue background.

An illustration of a person sitting on a sofa with various dimensions and features annotated, such as seat height, depth, and width.

A technical illustration of the blue RV Investigator research vessel connecting to shore power on a concrete dock via a crane and large cables.

Isometric technical illustration of a single-pipe heating system with a boiler, main pipe, three radiators, and a return pipe.

Schematic diagram of a wall, 4m wide and 3m tall, with a 2m wide window and wooden planks, displaying dimensions.

Detailed drawing of a wooden garden shed with a door, windows, and dimensions marked in red on a grassy ground.

An illustration of a wooden laptop cooling stand with dimensions and electrical components labeled, including two fans, a PWM module, and a 12V laptop adapter.

Overhead blueprint diagram of a bedroom floor plan, 3.5m by 2m, with a bed, door, wardrobe, and skylight.

Sketch of a residential plumbing plan showing a toilet, shower, and sink with waste pipes and sizes leading to a sewer.

A simple line diagram of structural engineering elements, including cross bracing, a damping system, and base isolation.

Technical illustration of a corner lamp system with a floor spotlight and a 45-degree mirror reflecting light along the ceiling.

A technical schematic illustration of a dual-function window blind that incorporates a whiteboard and a projector screen.

Line drawing of a shed or pavilion with a pitched roof, showing dimensions for width, height, and roof pitch.

A photorealistic wooden platform made of thick beams with metal brackets on a workshop floor, surrounded by wood shavings.

A technical sketch showing a delivery truck with an open bi-folding rear ramp, accompanied by multiple detailed drawings of the ramp mechanism.

Blue line sketch of a rustic shed bathroom plumbing diagram, showing toilet, sink, shower, and labeled pipes with dimensions.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

Illustration of four types of industrial bins: steel roll-off, flat deck roll-off, steel and slanted FEL, and nestable FEL bins.

A technical drawing on grid paper showing the top and side views of a mini golf course layout with dimensions labeled in centimeters. A scale of 1:50 is noted.

Instructional diagram showing how to wire a UK plug, connecting earth, neutral, and live wires to their respective terminals.

Photorealistic wall-mounted wooden coat hanger with frosted glass sliding doors and six hooks.

A 2D minimalist floor plan of a small attic bedroom with dimensions, an inward-opening door, and a built-in wardrobe.

Close-up of a building corner with corrugated metal roof, gray siding, and a window frame, showing sealant.