Studio

Upgrade to Pro

Sign up

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.

draw a double end stud that I can send direct to my customer See more

#hardware #tools #industrial #technical illustration

More images like this

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

Detailed diagram of a square taper bicycle bottom bracket with exposed bearings, rendered in a mechanical sketch style.

Diagram of a bolt, lock washer, flat washer, and round sleeve, each labeled.

Close-up of three shiny metallic tubes, two with interlocking mechanisms and one with a hole, ready to connect.

A detailed technical drawing of a complex mechanical part, shown in cross-section and various views, rendered on grid paper.

A transparent glass or quartz tube with seven copper-colored electromagnetic coils wrapped around its exterior, against a plain light background.

A detailed 2D drawing of a tow hitch attached to the rear of an SUV.

A grey adjustable wrench illustrated in a detailed sketch style, lying diagonally on a white background.

A close-up, photorealistic shot of shiny, reflective metal surfaces with soft lighting and a blurred background.

A drill bit, a caliper measuring gears, and an adjustable wrench, all against a dark background in a monochrome style.

A photorealistic render of a silver cylindrical metal cage with a grid pattern and three mounting tabs on a reflective surface.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

A detailed cutaway diagram of a shell and tube heat exchanger with blue and red arrows illustrating fluid flow.

Exploded view of bicycle crank components, including a chainring, axle, pedals, bolts, nuts, and washers, on a light gray background.

An outline drawing of a metallic beer can lying on its side with a key inserted into its pull-tab opening.

Photorealistic image of a hydraulic barrel with 'Plate Shop' text, tools, and sparks in a workshop.

Macro photo of electromagnetic suspension components with copper coils, a metallic ring, and sparks on grease-stained engineering schematics.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

A photorealistic rendering of a silver metallic cylinder with a textured band, resting on a reflective surface.

A close-up, photorealistic view of a large metal bolt with a thick washer and nut on a textured dark metal background.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

Top-down graphic of two rebar pieces labeled '#5' with a '6"' measurement.

A close-up, photorealistic shot of a metallic, truncated conical piece with a bore through its axis and two perpendicular grooves.

A black and white schematic drawing of a lifting assembly with a shackle at the top, three chains hanging from it, and a carabiner at the end of each chain.

Detailed black and white line drawing of a powerful car engine with visible pulleys and manifold.

A detailed schematic drawing of a metal lifting assembly with four chains connected to a shackle at the top and karabiners at the bottom, on a grid background.

Still life of various metallic automotive engine parts including a cylinder head gasket, camshaft, distributor cap, and injector.

A black and white close-up render of a prosthetic leg wearing fishnet stockings.

Photorealistic close-up of a large bolt and screws in a container, with wrenches and pliers, on a workbench in a hardware store.

An illustration of silver pipes forming a complex U-shaped structure, with a horizontal measurement indicating 20 cm below them.

A black and white line art diagram of a vehicle suspension system, labeled with arrows showing "ROLL", "BOUNCE", and "PITCH" motions.

Technical drawing of a roller mechanism with a motor, timing belt, pulleys, and a hinged arm, showing motion arrows.

Two metallic road rollers on a dirt ground with cranes in the background at a construction site under a blue sky.

A 3D render of a drill bit boring vertically through colorful horizontal geological layers in the earth.

A photorealistic 3D render of silver industrial pipes, valves, and flanges arranged to form the number 7, against a blurred blueprint background.

A shiny metallic cylinder with a long row of portholes floats under a clear blue sky.

A shiny metallic camshaft with gears rests on a dark, reflective surface with a spotlight.

Photorealistic studio shot of a shiny metal bolt, a split lock washer, and multiple flat washers on a gray background.

A close-up, photorealistic view of a large metal plain washer surrounded by various bolts, nuts, and smaller washers on a dark, textured surface.

A large grey metal pipe spool with flanges on a table in a workshop, with tools and blueprints.

A shiny aluminum tube is mounted perpendicularly on a square metal base plate, set against a concrete background.

A detailed cutaway view of a metal bolt screwed into a nut, with 85% of the non-contact threads highlighted in red.

A long, gray PVC pipe lies on a dark workbench in a workshop, with other metal tools visible around it.

Detailed line art exploded view of a classic Volkswagen engine, showing individual components.

Black and white line art illustration of a CNC router carving wood.

Technical drawing of a trailing arm suspension system with coil springs and a panhard rod, labeled with component names.

A black and white cross-sectional technical drawing of a cylinder liner, showing dimensions labeled D, d, H, and t.

Shiny silver utility duct cladding pipes on a dark surface in a blurred industrial setting.

A cutaway diagram of a shell and tube heat exchanger showing blue fluid entering and red fluid flowing through inner tubes.

Exploded view diagram illustrating the installation order of mechanical parts including flanges, gaskets, and housing components.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

Close-up of a technician's hands using a feeler gauge to measure a gap between metal parts in an industrial setting.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

Close-up of a metal bolt with a nut and thick washer, in an industrial setting.

Close-up of a silver double-ended stud on a gray surface.

Close-up, photorealistic image of a 7/8 inch metal bolt with a lock washer, a flat washer, and a thicker flat washer, all stacked on a brushed metal surface.

A silver metallic torsion spring mechanism with a long rod on a clean white background.

Silver can on its side with a key inserted into the opening, outline drawing.

A technical illustration of a shiny metallic gear and linkage mechanism on a light background.

Black and white CAD-style technical drawing of a partially exploded Minarelli 50cc engine, showing internal components.

Grayscale illustration of a mechanical roller machine with a motor, multiple staggered rollers, and a hinged lifting arm on a rectangular frame.

A metallic screw puzzle or jack on a dark wooden table, lit dramatically.

A light gray PVC pipe lies on a matching gray surface, showing its hollow interior.

Detailed line art sketch of an automatic bolt cutter on a base, with visible internal gears and a handle.

A collection of various metal industrial profiles including tubes, angle steels, channel steels, and I-beams on a white background.

A photorealistic silver tobacco tin with a screw-cap lid, a black vacuum pump stick attached to the side, and a black grommet at the bottom.

A black and white sketch of an industrial TX valve.

A labeled diagram illustrating a rack and pinion mechanism connecting to a larger gear, drawn in a sketch style.

A detailed product design sketch of a black travel mug with a red band, dark lid, and a flip-top opening, on a white background with pencil lines.

A technical line drawing showing a side view of a tandem-axle step deck semi trailer.

Black-and-white line drawing of a prosthetic arm with a quick-swap socket, a drill attachment, and a circular saw blade.

A technical drawing of a pen-style flashlight with a keychain clip, illuminating a contact lens on a light gray grid.