Criar

Estúdio

Remover Fundo

Pesquisar

Minhas imagens

Atualizar para Pro

Cadastrar

A dark gray metal plate with ends bent at 90 degrees, labeled with dimensions of 11 inches long and 1 inch high.

A dark gray metal plate with ends bent at 90 degrees, labeled with dimensions of 11 inches long and 1 inch high.

I need a 11" x 1" plate with 1" of each end bent back at 90 degrees. Ver mais

#product design #industrial design #illustration

More images like this

A detailed technical sketch of a rectangular box or cabinet with a single internal shelf, showing various dimensions and measurements with arrows.

Technical drawing of an oak soffit ventilator with dimensions and routed grille details.

Close-up of a wooden table with a square metal centerpiece and a brushed metal leg, lit by sunlight.

A photorealistic image of a brushed metal post with three horizontal cables, measured at 40 inches tall.

Five metal plates of stainless steel, titanium alloy, carbon steel, brass, and aluminum, each labeled, on a dark background.

A silver metal ladder with 9 rungs leans against a light gray wall in a photorealistic style.

Line drawing of a shed or pavilion with a pitched roof, showing dimensions for width, height, and roof pitch.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

A large black rectangle stands in front of a smaller blue rectangle on a light gray background.

Close-up of water-damaged white particle board from flatpack furniture, showing swollen ends and peeling surface.

A light gray PVC pipe lies on a matching gray surface, showing its hollow interior.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

A white barn-style sliding gate with horizontal slats and black top-mounted hardware, flanked by two matching fence panels.

A simple line diagram of structural engineering elements, including cross bracing, a damping system, and base isolation.

A detailed sketch of a square mahogany live edge table with metal corner accents, featuring prominent wood grain.

Photorealistic wall-mounted wooden coat hanger with frosted glass sliding doors and six hooks.

An exploded diagram of a wooden desk with a top, two drawers, and legs, surrounded by various metal bolts and rods, against a light background.

A technical diagram illustrating the cross-section of a 20' x 38' chalet with two superimposed roofs, showing wool insulation, a vapor barrier, ventilation space, and air flow.

A technical sketch showing a delivery truck with an open bi-folding rear ramp, accompanied by multiple detailed drawings of the ramp mechanism.

A sketch-style technical drawing of a rectangular box with internal shelves and labeled dimensions.

A black rectangular prism with a sloped top and cut-outs against a light blue gradient background, minimalist 3D render.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

An isometric sketch of a corner room featuring a wooden paneled wall with a hinged door and a cinder block wall with a sliding glass door. Dimensions are marked on the floor.

Close-up photorealistic image of textured metal plates, including shiny and scratched surfaces, on an industrial workbench.

A square, brushed metallic box with a flat top sits on a white surface under a spotlight, casting a shadow.

An isometric sketch of a silver galvanized industrial A-frame structure with chains and caster wheels in a workshop.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

A W-truss diagram on a dark blueprint grid, labeled with 7:12 pitch and 9' span.

A technical schematic illustration of a dual-function window blind that incorporates a whiteboard and a projector screen.

A collection of various metal industrial profiles including tubes, angle steels, channel steels, and I-beams on a white background.

A minimalist L-shaped black pedestal against a textured beige wall with soft shadows.

Photorealistic image of a light wood, two-shelf bookshelf unit viewed straight on, against a beige background.

A painterly image of a wooden ladder leaning against a dark wall at sunset, with geometric lines marking angles of 65, 25, and 90 degrees.

A pencil drawing on white paper shows a rectangle labeled 15cm by 7cm next to an unlabeled square, with a pencil resting below.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

A photorealistic, minimalist three-tier stepped rectangular base in satin bronze.

A brushed metal L-shaped bracket with dimensions 210mm high, 80mm wide, and 900mm long, shown on a grey background.

A black and white technical drawing of a small greenhouse with measurements and labels for OSB and plastic sheathing.

Isometric exploded diagram of a wooden cupboard, showing its components for assembly.

A shiny aluminum tube is mounted perpendicularly on a square metal base plate, set against a concrete background.

A photorealistic image of a dark metal grate door with a small lock, set against a concrete wall and floor.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

A metallic industrial bar with scratches, illuminated by a bright highlight, in a dark workshop.

A brushed metal cylinder with a rectangular cutout on its top surface, set against a grey background.

Two light brown wooden blocks, one resting on top of another, with a rectangular cutout in the lower block, on a dark brown surface.

A pile of black heavy-duty zip ties lies on a light-colored textured surface.

Technical drawing of a multi-tiered wooden quail cage with mesh sides, feeder trays, and capacity labels.

A dark wooden floating shelf on a white wall, adorned with stacks of old books and several decorative beige vases, bathed in natural light.

Technical drawing of a square panel with dimensions, folded edges, a slot, and a back view.

An aged, pitted two-tine tuning fork with a warped tine rests on sheet music atop a wooden table.

Close-up of a silver-gray cast metal connector joining two light wooden beams at a right angle, set against a blueprint background.

A tall, narrow wooden bookshelf with six shelves, depicted in an illustrated style with shadows from a window on the wall and floor.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

A long, open, light wooden box with 150cm length and 15cm width, on a white surface with shadows.

Illustration of a wooden and metal kitchen island with an integrated sink, showing dimensions of 48" L x 24" W x 36" H.

A sleek black rectangular box features multiple parallel gold stripes across its top surface, set against a dark background.

2D technical drawing of a trailer hitch cargo rack with dimensions 25", 45", 2", and -.5" labeled.

A photorealistic image of a thin, weathered metal strip leaning diagonally on a textured concrete floor in a dark, empty industrial room.

Top-down graphic of two rebar pieces labeled '#5' with a '6"' measurement.

A technical line drawing illustrating the construction details of a Rouge valley roof, including flashing, jack rafters, and valley rafters.

A 3D isometric sketch of an industrial A-frame structure with chains and caster wheels, set in a workshop.

Photorealistic image of a brushed steel triangular prism frame on swivel casters on a concrete workshop floor.

Two light-colored plywood boards, labeled '1320' and '580', stacked on a wooden table in a warm-lit workshop.

A detailed blueprint drawing of a metal door, complete with dimensions and labels, on a gridded background.

Close-up of a building corner with corrugated metal roof, gray siding, and a window frame, showing sealant.

A silver metallic rectangular bar with rounded edges rests on a dark, textured surface.

A white square shape with a small semi-circle attached to the end of each of its four corners, all on a plain grey background.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

A top-down rendering of a modern garden plot with mossy mounds, paved paths, and decorative stones, annotated with dimensions.

Technical illustration of a corner lamp system with a floor spotlight and a 45-degree mirror reflecting light along the ceiling.

A blank rectangular wooden frame with a mustard-colored insert against a white background.