Criar

Estúdio

Remover Fundo

Pesquisar

Minhas imagens

Atualizar para Pro

Cadastrar

Top-down graphic of two rebar pieces labeled '#5' with a '6"' measurement.

Top-down graphic of two rebar pieces labeled '#5' with a '6"' measurement.

Create a top down graphic of two #5 rebar, 6" apart Ver mais

#industrial #construction #diagram #technical illustration

More images like this

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.

Close-up of tightly coiled black rubberized steel cord in a factory setting with blurred machinery in the background.

A detailed cutaway view of a metal bolt screwed into a nut, with 85% of the non-contact threads highlighted in red.

Shiny silver utility duct cladding pipes on a dark surface in a blurred industrial setting.

An illustration of a silver ladder leaning against a wall, forming the hypotenuse of a right triangle with a 70-degree angle at the base.

Diagram of a bolt, lock washer, flat washer, and round sleeve, each labeled.

Close-up of blue braided cables with a white background, highlighting their intricate texture.

A light gray PVC pipe lies on a matching gray surface, showing its hollow interior.

Bundles of galvanized steel tubing stacked in a dimly lit industrial warehouse, photorealistic.

A coil of shiny copper wires bathed in warm sunlight, with dust motes floating in the air.

A minimalist illustration of a hexagonal prism with black outlines and three shades of gray, casting a shadow on a light background.

A technical line drawing showing a side view of a tandem-axle step deck semi trailer.

A top-down graphic of a grid pattern formed by steel rebar, with a central square made of double bars and single bars forming a finer grid inside.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

A blueprint-style diagram illustrating a mechanical latching system with labeled components including a hook arm, mounting block, cam lock, and optional spring.

An illustration of silver pipes forming a complex U-shaped structure, with a horizontal measurement indicating 20 cm below them.

A rectangular block of textured silver metal resting on a dark, reflective surface.

Simple illustration of an electrical circuit with a 12V power supply and a resistor.

An overhead diagram showing two grey cargo containers placed immediately adjacent to each other lengthwise.

Two truck tires form the number '60', with blue and yellow accents. A sketch of historic European church towers is in the background.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

Photorealistic studio shot of a shiny metal bolt, a split lock washer, and multiple flat washers on a gray background.

A close-up, photorealistic view of a large metal bolt with a thick washer and nut on a textured dark metal background.

A detailed schematic drawing of a metal lifting assembly with four chains connected to a shackle at the top and karabiners at the bottom, on a grid background.

A long, gray PVC pipe lies on a dark workbench in a workshop, with other metal tools visible around it.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

A 3D render of a drill bit boring vertically through colorful horizontal geological layers in the earth.

Grayscale illustration of a mechanical roller machine with a motor, multiple staggered rollers, and a hinged lifting arm on a rectangular frame.

Two large nails stand upright on a wet city street, with blurred city buildings and lights in the background.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

A shiny, dark metallic object with a helical, twisted shape stands upright against a neutral gradient background.

A yellow excavator with a transparent plexiglass rock guard on its side, working in a dusty, sunlit mining or construction site.

A minimalist black and white diagram of a landscape-oriented sheet divided into 8 sections by hatched lines.

Photorealistic close-up of a large bolt and screws in a container, with wrenches and pliers, on a workbench in a hardware store.

Close-up photorealistic image of textured metal plates, including shiny and scratched surfaces, on an industrial workbench.

A detailed technical illustration of a 1 1/2 inch pipe connecting to a 4-inch pipe with a labeled 90-degree elbow fitting.

A technical line drawing illustrating the construction details of a Rouge valley roof, including flashing, jack rafters, and valley rafters.

Technical illustration of a no-drill surface mounting system with labeled components.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

Two construction workers operate a drilling rig installing a ground anchor, with a cross-section of earth layers visible.

A collection of various metal industrial profiles including tubes, angle steels, channel steels, and I-beams on a white background.

A dense, overhead view of numerous salvaged grey PVC tubes of various sizes protruding from a wall, forming an abstract pattern.

Close-up of a brushed silver aluminum sheet with semicircular cutouts along the edge, reflecting light.

A shiny aluminum tube is mounted perpendicularly on a square metal base plate, set against a concrete background.

A pile of black heavy-duty zip ties lies on a light-colored textured surface.

A black rectangular prism with a sloped top and cut-outs against a light blue gradient background, minimalist 3D render.

A W-truss diagram on a dark blueprint grid, labeled with 7:12 pitch and 9' span.

A monochrome architectural sketch of a building under construction with two towering cranes against a light background.

Two metallic road rollers on a dirt ground with cranes in the background at a construction site under a blue sky.

Exploded view diagram illustrating the installation order of mechanical parts including flanges, gaskets, and housing components.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

A photorealistic image of a thin, weathered metal strip leaning diagonally on a textured concrete floor in a dark, empty industrial room.

Close-up of three shiny metallic tubes, two with interlocking mechanisms and one with a hole, ready to connect.

Labeled diagram of a double pulley system showing fixed and movable blocks, rope, load, force, and 4:1 advantage.

A monochrome technical drawing of a wooden container with six compartments filled with bolts, showing dimensions.

A metal hoe with a wooden handle rests against a grey pole, surrounded by other poles and water droplets on a light pink surface, in a 2D cartoon style.

A close-up, photorealistic view of a large metal plain washer surrounded by various bolts, nuts, and smaller washers on a dark, textured surface.

Close-up, photorealistic image of a 7/8 inch metal bolt with a lock washer, a flat washer, and a thicker flat washer, all stacked on a brushed metal surface.

Pen and ink drawing of multiple stacks of plywood boards inside a building under construction, with visible wooden beams and roof trusses.

Close-up of a metal bolt with a nut and thick washer, in an industrial setting.

A transparent glass or quartz tube with seven copper-colored electromagnetic coils wrapped around its exterior, against a plain light background.

A close-up, photorealistic image of a metal drill bit with the word 'META' engraved on its side, against a dark background.

Diagram of a concrete catch basin with inlet and outlet pipes, sediment trap, and removable cover.

A clear, labeled diagram illustrating the internal wiring of a UK 3-pin electrical plug, showing live, neutral, and earth connections.

A photorealistic render of a silver cylindrical metal cage with a grid pattern and three mounting tabs on a reflective surface.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

Illustrated construction site with a deep pit, tieback wall, crane, excavator, workers, and city skyline at sunset.

An abstract black and gray image with vertical bars of varying lengths creating a barcode-like pattern on a dark gray background.

Technical drawing of a roller mechanism with a motor, timing belt, pulleys, and a hinged arm, showing motion arrows.

Detailed diagram of a square taper bicycle bottom bracket with exposed bearings, rendered in a mechanical sketch style.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

A piece of paper states 'Material needed: #8 screw.' A hand reaches into a box of '#7 SCREWS,' next to an empty box labeled '#9 SCREWS.' Two pipes with garbled 'CAUTION' labels are in the background, and a thought bubble says 'this will fit enough!'