Estúdio

Atualizar para Pro

Cadastrar

Metal U-channel with rollers and dimensional callouts.

Metal U-channel with rollers and dimensional callouts.

draw a 3 inch by 3 inch u shaped channel 6 inches long with 2 rollers centered 1 inch from each end Ver mais

#hardware #mechanical parts #technical illustration

More images like this

2D technical drawing of a trailer hitch cargo rack with dimensions 25", 45", 2", and -.5" labeled.

A 3D isometric sketch of an industrial A-frame structure with chains and caster wheels, set in a workshop.

A sketch-style technical drawing of a rectangular box with internal shelves and labeled dimensions.

A detailed technical sketch of a rectangular box or cabinet with a single internal shelf, showing various dimensions and measurements with arrows.

Photorealistic isometric view of a clean, metallic industrial conveyor belt with side guards, on a light gray tiled floor, showing a 60cm measurement.

A shiny metallic rectangular box sits on a dark marble surface, reflecting light.

A collection of various metal industrial profiles including tubes, angle steels, channel steels, and I-beams on a white background.

Black and white technical sketch of a machine with a square feeder, a hopper, and a long pipe extending right with dimension labels.

Close-up photorealistic image of textured metal plates, including shiny and scratched surfaces, on an industrial workbench.

A rectangular block of textured silver metal resting on a dark, reflective surface.

A technical line drawing illustrating the construction details of a Rouge valley roof, including flashing, jack rafters, and valley rafters.

A detailed sketch of a silver cable organizer with black and blue cables neatly stored inside.

A close-up, photorealistic view of a large metal plain washer surrounded by various bolts, nuts, and smaller washers on a dark, textured surface.

Close-up of a brushed silver aluminum sheet with semicircular cutouts along the edge, reflecting light.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

An isometric sketch of a corner room featuring a wooden paneled wall with a hinged door and a cinder block wall with a sliding glass door. Dimensions are marked on the floor.

A white barn-style sliding gate with horizontal slats and black top-mounted hardware, flanked by two matching fence panels.

A metallic industrial bar with scratches, illuminated by a bright highlight, in a dark workshop.

A silver metallic rectangular bar with rounded edges rests on a dark, textured surface.

A shiny, iridescent silver poly mailer package resting on a white surface.

A shiny aluminum tube is mounted perpendicularly on a square metal base plate, set against a concrete background.

A metallic rectangular box with screws on top sits on a diamond plate metal surface in a close-up, photorealistic style.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

Five metal plates of stainless steel, titanium alloy, carbon steel, brass, and aluminum, each labeled, on a dark background.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

A large black rectangle stands in front of a smaller blue rectangle on a light gray background.

Blueprint-style drawing of a gray box with an opening on top, showing multiple views and dimensions on a blue grid.

A square, translucent plastic base with four metal mouse traps arranged on it, with ramps on each side, set on a dark surface.

A detailed blueprint drawing of a metal door, complete with dimensions and labels, on a gridded background.

A photorealistic rendering of a silver metallic cylinder with a textured band, resting on a reflective surface.

A sleek black rectangular box features multiple parallel gold stripes across its top surface, set against a dark background.

A technical drawing on grid paper showing the top and side views of a mini golf course layout with dimensions labeled in centimeters. A scale of 1:50 is noted.

A photorealistic render of a silver cylindrical metal cage with a grid pattern and three mounting tabs on a reflective surface.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

Modern aluminum fence, linear drainage grate, and gray square pavers against a deep blue background.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

A photorealistic, minimalist three-tier stepped rectangular base in satin bronze.

A brushed metal cylinder with a rectangular cutout on its top surface, set against a grey background.

A white square shape with a small semi-circle attached to the end of each of its four corners, all on a plain grey background.

An isometric sketch of a silver galvanized industrial A-frame structure with chains and caster wheels in a workshop.

A close-up, photorealistic shot of a metallic, truncated conical piece with a bore through its axis and two perpendicular grooves.

Photorealistic image of a metal plate with three distinct weld beads, with a blurred industrial workshop in the background.

Isometric exploded diagram of a wooden cupboard, showing its components for assembly.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

A dark grey metal plate with diverse laser-cut keyhole and geometric perforations, with some shapes resembling garbled text, stands in a workshop.

A black rectangular prism with a sloped top and cut-outs against a light blue gradient background, minimalist 3D render.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

Close-up of a silver-gray cast metal connector joining two light wooden beams at a right angle, set against a blueprint background.

Illustration of a wooden and metal kitchen island with an integrated sink, showing dimensions of 48" L x 24" W x 36" H.

A clean line drawing of a clear, square plastic food storage container with a lid.

A technical sketch showing a delivery truck with an open bi-folding rear ramp, accompanied by multiple detailed drawings of the ramp mechanism.

A photorealistic image of a dark metal grate door with a small lock, set against a concrete wall and floor.

A long, open, light wooden box with 150cm length and 15cm width, on a white surface with shadows.

A square, brushed metallic box with a flat top sits on a white surface under a spotlight, casting a shadow.

Technical drawing of an oak soffit ventilator with dimensions and routed grille details.

Exploded view diagram of an alkaline water electrolyzer cell assembly with grey plates, red foam, and a white membrane.

A brushed metal L-shaped bracket with dimensions 210mm high, 80mm wide, and 900mm long, shown on a grey background.

Close-up of a wooden table with a square metal centerpiece and a brushed metal leg, lit by sunlight.

A textured, silvery metal block in a dimly lit laboratory with glassware and scientific equipment.

Photorealistic image of a brushed steel triangular prism frame on swivel casters on a concrete workshop floor.

Isometric 3D render of a high-detail railway axle ultrasonic testing system with wheels on rollers and an overhead gantry.

Photorealistic studio shot of a shiny metal bolt, a split lock washer, and multiple flat washers on a gray background.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

A light gray PVC pipe lies on a matching gray surface, showing its hollow interior.

A detailed technical illustration of a 1 1/2 inch pipe connecting to a 4-inch pipe with a labeled 90-degree elbow fitting.

A long brown cardboard tube with a transparent plastic window showing several white balls inside, on a white background.

A blueprint style drawing of an aquarium lid with a pin art panel and filter tubes on a blue grid.

Top-down graphic of two rebar pieces labeled '#5' with a '6"' measurement.

Photorealistic dark, scratched nickel ingot under a bright lamp in a dimly lit industrial lab with scattered metal pieces.

Photorealistic close-up of a dark metal gravity hinged flap mechanism on a blurred blueprint background.

A white rectangular box with a lid in a minimalist grey room, displaying dimensions 200cm, 140cm, and 15cm.