Studio

Auf Pro upgraden

Registrieren

Sketch of a ball valve connected to a pipe on a plate with dimensions.

Sketch of a ball valve connected to a pipe on a plate with dimensions.

could you create me side view sketch of a plate 6mm thick 150 x150mm with a stud in welded and ball valve on it center stud in is for a 3" valve connected via pipe horizontally Mehr sehen

#technical drawing #illustration #plumbing #technical illustration

More images like this

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

A monochrome technical drawing of a wooden container with six compartments filled with bolts, showing dimensions.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

Detailed line art sketch of an automatic bolt cutter on a base, with visible internal gears and a handle.

A technical illustration of a shiny metallic gear and linkage mechanism on a light background.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

An illustration of silver pipes forming a complex U-shaped structure, with a horizontal measurement indicating 20 cm below them.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

A metal hoe with a wooden handle rests against a grey pole, surrounded by other poles and water droplets on a light pink surface, in a 2D cartoon style.

Detailed diagram of a square taper bicycle bottom bracket with exposed bearings, rendered in a mechanical sketch style.

Hand-drawn technical sketch of an air-powered launcher made from a milk jug and plastic bottles with labels pointing to each part.

Hand-drawn isometric sketch of a Minecraft cauldron with water ripples, a dripstone block above, and a falling water drop.

A simple black and white line drawing of a flow cytometry diagram, showing cell shapes, a scatter plot, and process arrows.

Photorealistic technical illustration of a stainless steel three-way control valve with high-pressure water flow and a hydraulic circuit diagram.

A technical line drawing of a 6-axis FANUC industrial robot arm with a suction cup tool, shown with 3D coordinate axes and dimensions.

Technical sketch of a light plywood cat climbing and hiding shelf for a camper van, showing multiple views and ventilation.

Detailed illustration of a laboratory mixer with probes immersed in a liquid-filled vessel.

A simple line diagram of structural engineering elements, including cross bracing, a damping system, and base isolation.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.

Technical drawing of a roller mechanism with a motor, timing belt, pulleys, and a hinged arm, showing motion arrows.

Black-and-white line drawing of a prosthetic arm with a quick-swap socket, a drill attachment, and a circular saw blade.

A technical hand-drawn style sketch of a homemade air-powered bottle launcher. A foot presses on a milk jug connected by an air tube to a launcher bottle, with a rocket-shaped projectile inside it, labeled with parts like 'MILK JUG', 'AIR TUBE', 'LAUNCHER BOTTTTLE', and 'FINS'.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

A clear, labeled diagram illustrating the internal wiring of a UK 3-pin electrical plug, showing live, neutral, and earth connections.

Blue line sketch of a rustic shed bathroom plumbing diagram, showing toilet, sink, shower, and labeled pipes with dimensions.

Black and white technical sketch of a machine with a square feeder, a hopper, and a long pipe extending right with dimension labels.

An isometric sketch of a corner room featuring a wooden paneled wall with a hinged door and a cinder block wall with a sliding glass door. Dimensions are marked on the floor.

A technical drawing on grid paper showing the top and side views of a mini golf course layout with dimensions labeled in centimeters. A scale of 1:50 is noted.

Diagram of a concrete catch basin with inlet and outlet pipes, sediment trap, and removable cover.

Blueprint-style drawing of a wrist-mounted futuristic gadget with a nozzle and trigger, with a hand wearing it. Section view and dimensions are shown.

Minimalist diagram illustrating a hydroelectric dam with a reservoir, dam, turbine, and generator labeled.

Exploded view diagram illustrating the installation order of mechanical parts including flanges, gaskets, and housing components.

Diagram showing a water system with an elevated lake, pump station, groundwater basin, and pipes for water flow.

A silver metallic torsion spring mechanism with a long rod on a clean white background.

Grayscale illustration of a mechanical roller machine with a motor, multiple staggered rollers, and a hinged lifting arm on a rectangular frame.

A detailed technical drawing of a complex mechanical part, shown in cross-section and various views, rendered on grid paper.

Scientific diagram illustrating a standing wave with labels for node, antinode, and wavelength, and a traveling wave below.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

A technical illustration of a mechanical water level indicator with a ping pong ball float, nylon thread, pulley, and a pointer on a circular dial with red, yellow, and green zones.

Technical illustration of a corner lamp system with a floor spotlight and a 45-degree mirror reflecting light along the ceiling.

A detailed blueprint drawing of a metal door, complete with dimensions and labels, on a gridded background.

Technical illustration of a no-drill surface mounting system with labeled components.

Greyscale technical drawing of an automotive spray gun with parts labeled as nozzle, handle, and trigger.

A long brown cardboard tube with a transparent plastic window showing several white balls inside, on a white background.

A shiny aluminum tube is mounted perpendicularly on a square metal base plate, set against a concrete background.

Diagram of a bolt, lock washer, flat washer, and round sleeve, each labeled.

Labeled diagram of a double pulley system showing fixed and movable blocks, rope, load, force, and 4:1 advantage.

A detailed technical illustration of a 1 1/2 inch pipe connecting to a 4-inch pipe with a labeled 90-degree elbow fitting.

A black and white diagram illustrates an egg cracking mechanism with a motor, cranks, coupler link, plunger, and pivoting arms, labeled with forces and components.

Blueprint-style drawing of a gray box with an opening on top, showing multiple views and dimensions on a blue grid.

A 3D diagram shows a tunnel boring machine in a cross-section, digging under a body of water, revealing its internal structure.

Isometric engineering drawing of an industrial machine with a conveyor belt, feeding system, and inspection stations.

Black-and-white scientific diagram of a simple pendulum experiment with labeled components like bob, string, photogate, and timer.

A black and white sketch of an industrial TX valve.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

A schematic illustration of two large industrial tanks. One tank on the left is filled with water and labeled '650 L'. The tank on the right is empty except for several concrete samples at its base and is labeled '100.mn'. A hose connects a submersible pump in each tank to the other tank.

Black and white line art illustration of a CNC router carving a swirling pattern into wood.

Isometric technical illustration of a single-pipe heating system with a boiler, main pipe, three radiators, and a return pipe.

Sketch of a residential plumbing plan showing a toilet, shower, and sink with waste pipes and sizes leading to a sewer.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

Isometric exploded diagram of a wooden cupboard, showing its components for assembly.

A technical line drawing illustrating the construction details of a Rouge valley roof, including flashing, jack rafters, and valley rafters.

A photorealistic 3D render of silver industrial pipes, valves, and flanges arranged to form the number 7, against a blurred blueprint background.

An illustration of a drip irrigation system in an orchard with two large water drums, pipes, connectors, a pressure regulator, and labels indicating component names and sizes.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

A detailed technical sketch of a rectangular box or cabinet with a single internal shelf, showing various dimensions and measurements with arrows.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

Detailed cutaway illustration of an underground valve well with a pipe, valve, electrical box, and manhole cover in a grassy setting.

Pencil sketch of a scooter's rear wheel and rectangular LED taillight, with '44mm' dimensions marked.

A black and white line art diagram of a vehicle suspension system, labeled with arrows showing "ROLL", "BOUNCE", and "PITCH" motions.

A futuristic, modern, minimalistic metallic door handle rendered realistically on a grey background.