Erstellen

Studio

Hintergrund entfernen

Suchen

Meine Bilder

Auf Pro upgraden

Registrieren

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

technische Zeichnung für ein Wasserrohr 1 Zoll im Durchmesser beide Seiten Außengewinde und eine Gesamtlänge von 21,5 cm Mehr sehen

#technical drawing #plumbing #illustration #technical illustration

More images like this

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

Diagram of a bolt, lock washer, flat washer, and round sleeve, each labeled.

Cartoon diagram of a water system with an aquifer, water infiltration pipe, pump station, and elevated lake.

A detailed cutaway diagram of a shell and tube heat exchanger with blue and red arrows illustrating fluid flow.

Technical illustration of a vertical PVC pipe air filter with zeolite granules, a mesh screen, and a 5V USB fan, showing airflow and dimensions.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

Blue line sketch of a rustic shed bathroom plumbing diagram, showing toilet, sink, shower, and labeled pipes with dimensions.

Black-and-white line drawing of a prosthetic arm with a quick-swap socket, a drill attachment, and a circular saw blade.

A detailed cross-section diagram of a groundwater monitoring well, showing layers of grout, bentonite, sand pack, and a well screen with measurements.

Minimalist diagram illustrating a hydroelectric dam with a reservoir, dam, turbine, and generator labeled.

Highly detailed black and white technical illustration of an overflowing kitchen sink with running water and soap suds.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

Diagram explaining wind generation, showing sun, water, warm ground, and air currents moving between low and high pressure areas.

An illustration of a chemistry experiment with a measuring cylinder pouring liquid into five beakers labeled with different chemical substances. A clock indicates a 10-minute wait time.

Top-down graphic of two rebar pieces labeled '#5' with a '6"' measurement.

A technical line drawing illustrating the construction details of a Rouge valley roof, including flashing, jack rafters, and valley rafters.

Watercolor illustration of an assistive motorized watering device on a walker frame, labeled with its features, in a vibrant garden.

Diagram showing a water system with an elevated lake, pump station, groundwater basin, and pipes for water flow.

A schematic illustration of two large industrial tanks. One tank on the left is filled with water and labeled '650 L'. The tank on the right is empty except for several concrete samples at its base and is labeled '100.mn'. A hose connects a submersible pump in each tank to the other tank.

A clear diagram of a single-pipe heating system showing a boiler, radiators, supply pipe, and return pipe with flow arrows.

A cross-section engineering illustration of an underground valve well, showing a blue valve on a pipe inside concrete walls with a 2m depth.

Detailed cutaway illustration of an underground valve well with a pipe, valve, electrical box, and manhole cover in a grassy setting.

A monochrome technical drawing of a wooden container with six compartments filled with bolts, showing dimensions.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

A detailed scientific illustration of a solar thermal energy storage system, with a cutaway showing internal components, next to a building.

A technical illustration of a shiny metallic gear and linkage mechanism on a light background.

A four-panel diagram illustrating how to turn on a fan, showing its state from off to spinning with airflow.

Illustration of a wooden and metal kitchen island with an integrated sink, showing dimensions of 48" L x 24" W x 36" H.

A simple line drawing diagram of a solar electric circuit, showing photovoltaic panels, controller, battery bank, and a house.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

A hand-drawn free body diagram on graph paper shows a 250kg block with a 150N force arrow to the east and a 350N force arrow 45 degrees south of west.

Anatomy diagram of an air conditioner showing its internal components like evaporator coils, condenser fins, and compressor.

Illustrative diagram of a silicone mold casting process, showing hands in four steps: placing an object in liquid, removing a cast, and pouring liquid into a mold. Styled as a vintage instructional guide.

An illustration showing a folded gray mesh drying rack next to an unfolded four-tier mesh drying rack, with "CAUTION!" text and a warning about sudden extension.

Technical drawing of a roller mechanism with a motor, timing belt, pulleys, and a hinged arm, showing motion arrows.

Isometric technical illustration of a single-pipe heating system with a boiler, main pipe, three radiators, and a return pipe.

Technical drawing of a cross-section diagram showing a backyard pond with a pump and filter system.

Sketch of a residential plumbing plan showing a toilet, shower, and sink with waste pipes and sizes leading to a sewer.

An isometric cutaway diagram of a catch basin showing its grate, inlet, sump, and outfall, with water flowing through.

An illustration of silver pipes forming a complex U-shaped structure, with a horizontal measurement indicating 20 cm below them.

A black and white sketch of an industrial TX valve.

A 3D diagram shows a tunnel boring machine in a cross-section, digging under a body of water, revealing its internal structure.

Exploded view diagram illustrating the installation order of mechanical parts including flanges, gaskets, and housing components.

A detailed diagram illustrating the wiring of an electrical plug, showing connections for neutral, live, and earth wires.

A technical illustration of a mechanical water level indicator with a ping pong ball float, nylon thread, pulley, and a pointer on a circular dial with red, yellow, and green zones.

Diagram of a vertical column with inward arrows labeled 'Compression Force' and the label 'In Compression' below.

A rainwater harvesting system with gray pipes on a stone wall, directing water into three metal barrels with green plants.

A light gray PVC pipe lies on a matching gray surface, showing its hollow interior.

A technical diagram illustrating the cross-section of a 20' x 38' chalet with two superimposed roofs, showing wool insulation, a vapor barrier, ventilation space, and air flow.

A scientific diagram illustrating heat energy transfer from burning food to water in a soda can, with some energy lost to surroundings. Stylized illustration.

An educational illustration depicting a rock, water in a glass, and a log under "MATTER" on the left, and smoke and sound waves under "NOT MATTER" on the right.

Diagram of a concrete catch basin with inlet and outlet pipes, sediment trap, and removable cover.

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.

An illustration of a drip irrigation system in an orchard with two large water drums, pipes, connectors, a pressure regulator, and labels indicating component names and sizes.

A detailed technical illustration of a 1 1/2 inch pipe connecting to a 4-inch pipe with a labeled 90-degree elbow fitting.

A clear, labeled diagram illustrating the internal wiring of a UK 3-pin electrical plug, showing live, neutral, and earth connections.

A cutaway diagram of a shell and tube heat exchanger showing blue fluid entering and red fluid flowing through inner tubes.

Detailed diagram of a square taper bicycle bottom bracket with exposed bearings, rendered in a mechanical sketch style.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

A transparent glass or quartz tube with seven copper-colored electromagnetic coils wrapped around its exterior, against a plain light background.

A physics diagram showing two wooden crates connected by a chain. Forces and masses are labeled: a 35 N horizontal force on the left crate, which has a mass of 6 kg, and vertical 5 N forces. The right crate has a mass of 4 kg and vertical 3 N forces. The background is a textured brown.

A long brown cardboard tube with a transparent plastic window showing several white balls inside, on a white background.

A black and white sketch of a laundry detergent bottle with a pouring spout.

Scientific diagram illustrating a standing wave with labels for node, antinode, and wavelength, and a traveling wave below.

A diagram of a chemical vessel with rescue pre-plan zones labeled hot, warm, and cold, including a master shut-off valve and compass rose, in a sketch and watercolor style on grid paper.

A metal hoe with a wooden handle rests against a grey pole, surrounded by other poles and water droplets on a light pink surface, in a 2D cartoon style.

Illustration of four types of industrial bins: steel roll-off, flat deck roll-off, steel and slanted FEL, and nestable FEL bins.

Instructional diagram showing how to wire a UK plug, connecting earth, neutral, and live wires to their respective terminals.

Clear bottle of golden lubricating oil next to a detailed diagram of an oil circulation system with labeled parts.

A detailed schematic drawing of a metal lifting assembly with four chains connected to a shackle at the top and karabiners at the bottom, on a grid background.

An instructional diagram shows a person in a face shield and gloves unloading biochar from a horizontal retort kiln into bins. Labels indicate cooling and finished product.