Erstellen

Studio

Hintergrund entfernen

Suchen

Meine Bilder

Auf Pro upgraden

Registrieren

A technical pencil drawing of a 40mm long, 10mm diameter cylinder with dimensions, and a detailed assembly sketch below it.

A technical pencil drawing of a 40mm long, 10mm diameter cylinder with dimensions, and a detailed assembly sketch below it.

Technische Bleistiftzeichnung im Mischstil: Ein Zylinderstift in isometrischer Ansicht. Länge 40 mm, Durchmesser 10 mm. Links und rechts leichte Schraffur. Maßlinien: Gesamtlänge 40 mm, Durchmesser 10 mm. Darunter eine kleine Einbauskizze: Platte 10 mm, Scheibe 12 mm, Kurbel 15 mm, Stift durch alle drei Bauteile geführt. Klare technische Linien, leichte Bleistifttextur. Mehr sehen

#technical drawing #engineering #mechanical parts

More images like this

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.

A silver metallic torsion spring mechanism with a long rod on a clean white background.

A close-up, photorealistic shot of a metallic, truncated conical piece with a bore through its axis and two perpendicular grooves.

An illustration of silver pipes forming a complex U-shaped structure, with a horizontal measurement indicating 20 cm below them.

Technical drawing of a square panel with dimensions, folded edges, a slot, and a back view.

A sleek, brushed silver metal pencil sharpener with a minimalist design, on a light gray background.

A brushed metal L-shaped bracket with dimensions 210mm high, 80mm wide, and 900mm long, shown on a grey background.

Isometric 3D render of a high-detail railway axle ultrasonic testing system with wheels on rollers and an overhead gantry.

Black and white technical sketch of a machine with a square feeder, a hopper, and a long pipe extending right with dimension labels.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

Two white belts, one laid out in a wavy shape and another coiled in a circle, in a clean vector-style illustration on a light grey background.

A transparent glass or quartz tube with seven copper-colored electromagnetic coils wrapped around its exterior, against a plain light background.

2D technical drawing of a trailer hitch cargo rack with dimensions 25", 45", 2", and -.5" labeled.

An isometric technical drawing shows a cardboard box filled with layers of aluminum discs, resting on a wooden pallet, with dimensions annotated.

Exploded view diagram of an alkaline water electrolyzer cell assembly with grey plates, red foam, and a white membrane.

A clean line drawing of a clear, square plastic food storage container with a lid.

A line drawing of an open egg cracker device with a cracked egg and shell fragments next to it.

Isometric technical drawing of a movable wooden storage shelf on wheels with four rows of open-top bins and two rows of smaller closed bins. Dimensions are shown.

Pencil sketch of three toilet cubicles with dimensions 2580mm and 7228mm marked.

Technical drawing of a cylindrical plate with multiple holes, showing top and side views with dimensions for diameter, height, and hole size.

A light gray PVC pipe lies on a matching gray surface, showing its hollow interior.

Pencil sketch of a tube with internal wavy, compressed, and dilated sections, representing peristaltic movement.

A photorealistic render of a silver cylindrical metal cage with a grid pattern and three mounting tabs on a reflective surface.

A technical line drawing depicting a double busbar switchgear system fed from two transformers.

Technical drawing of a roller mechanism with a motor, timing belt, pulleys, and a hinged arm, showing motion arrows.

Black and white line art illustration of a CNC router carving a swirling pattern into wood.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

A simple black line drawing of a cylinder on a white background.

Grayscale illustration of a mechanical roller machine with a motor, multiple staggered rollers, and a hinged lifting arm on a rectangular frame.

Illustration of two poles, 50m and 1m tall, 1m apart, with an 80m sagging rope between their tops in a field.

A photorealistic silver tobacco tin with a screw-cap lid, a black vacuum pump stick attached to the side, and a black grommet at the bottom.

A floating red and green 'dog bone' type resistor with a yellow dot on a light background.

A simple black and white line drawing of a missile with fins at the rear.

A photorealistic image of a brushed metal post with three horizontal cables, measured at 40 inches tall.

A black and white geometric diagram showing the construction of an angle bisector using a compass and straightedge, with points A, B, D, E, F labeled.

A 3D diagram shows a tunnel boring machine in a cross-section, digging under a body of water, revealing its internal structure.

A black and white cross-sectional technical drawing of a cylinder liner, showing dimensions labeled D, d, H, and t.

A long brown cardboard tube with a transparent plastic window showing several white balls inside, on a white background.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

Detailed pencil drawing of a suction cup, labeled with its dimensions including 30mm diameter, 11mm height, and an R10 radius.

A photorealistic rendering of a silver metallic cylinder with a textured band, resting on a reflective surface.

A black rectangular prism with a sloped top and cut-outs against a light blue gradient background, minimalist 3D render.

A bright yellow safety handrail is bolted securely to the floor in a professional cartoon sketch style.

A white square shape with a small semi-circle attached to the end of each of its four corners, all on a plain grey background.

A neon green AutoCAD-style technical drawing on a black background, showing a rectangular steel mesh panel with dimensions and mounting holes.

A dark brushed metal rod bent at a right angle, with a silver button on the upright end, on a reflective black surface.

A futuristic, modern, minimalistic metallic door handle rendered realistically on a grey background.

A blueprint style drawing of an aquarium lid with a pin art panel and filter tubes on a blue grid.

A brushed metal cylinder with a rectangular cutout on its top surface, set against a grey background.

A close-up, photorealistic view of a large metal plain washer surrounded by various bolts, nuts, and smaller washers on a dark, textured surface.

Diagram of a vertical column with inward arrows labeled 'Compression Force' and the label 'In Compression' below.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

Photorealistic studio shot of a shiny metal bolt, a split lock washer, and multiple flat washers on a gray background.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

Black and white engineering drawing of a 100mm diameter, 10mm high disc with eight 6mm holes, showing top and side views with dimensions.

A shiny aluminum tube is mounted perpendicularly on a square metal base plate, set against a concrete background.

A shiny metallic cylinder with a long row of portholes floats under a clear blue sky.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

A technical drawing on grid paper showing the top and side views of a mini golf course layout with dimensions labeled in centimeters. A scale of 1:50 is noted.

A collection of various metal industrial profiles including tubes, angle steels, channel steels, and I-beams on a white background.

Isometric black and white line drawing of a modern outdoor stage with arches and stairs.

A long, gray PVC pipe lies on a dark workbench in a workshop, with other metal tools visible around it.

Close-up of three shiny metallic tubes, two with interlocking mechanisms and one with a hole, ready to connect.

Three side-by-side simple illustrations of mailboxes with open lids and raised red flags. The first is an outline drawing, the second has a grey interior, and the third is entirely grey.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

Close-up of a silver double-ended stud on a gray surface.

A detailed technical illustration of a 1 1/2 inch pipe connecting to a 4-inch pipe with a labeled 90-degree elbow fitting.

A detailed blueprint drawing of a metal door, complete with dimensions and labels, on a gridded background.

Isometric technical drawing showing the disassembled components of a rectangular hamster cage.

Photorealistic isometric view of a clean, metallic industrial conveyor belt with side guards, on a light gray tiled floor, showing a 60cm measurement.

Scientific diagram illustrating a standing wave with labels for node, antinode, and wavelength, and a traveling wave below.