Studio

Auf Pro upgraden

Registrieren

Scientific diagram of two metal plates bonded with adhesive, held by two wooden clamping weights, against a white background.

Scientific diagram of two metal plates bonded with adhesive, held by two wooden clamping weights, against a white background.

Diagram of two aluminum specimens stacked with adhesive applied in the bonding area, with two 2x4 wooden beams placed on top as weight. Show proper alignment and even clamping. Scientific illustration, clean white background, labeled ‘Adhesive’, ‘Clamping weight’, and ‘Bonded area’ Mehr sehen

#science #engineering #diagram

More images like this

Diagram of a vertical column with inward arrows labeled 'Compression Force' and the label 'In Compression' below.

Infographic showing a glowing copper bar with high CTE and a carbon fiber bar with low CTE on a dark grid.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

An illustration of stacked material layers: a transparent sheet, two wood planks, a dark wood plank, and a particle board base.

An isometric cross-section diagram showing the layers of an intensive green roof, including substrate, geotextile filter, drainage, protective fleece, waterproof membrane, and load-bearing structure.

Black and white line art illustration of a CNC router carving a swirling pattern into wood.

A clear, labeled diagram illustrating the internal wiring of a UK 3-pin electrical plug, showing live, neutral, and earth connections.

Close-up of a silver-gray cast metal connector joining two light wooden beams at a right angle, set against a blueprint background.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

A 3D render of a drill bit boring vertically through colorful horizontal geological layers in the earth.

Exploded view diagram of an alkaline water electrolyzer cell assembly with grey plates, red foam, and a white membrane.

Photorealistic close-up of a gray PTFE belt moving through a stainless steel industrial continuous sealing machine.

A square, brushed metallic box with a flat top sits on a white surface under a spotlight, casting a shadow.

Scientific illustration of hexagonal BN platelets in a blue epoxy matrix with red heat flow arrows, inset shows atomic structure.

A cross-section diagram showing earth layers (topsoil, subsoil, weathered rock, bedrock) next to a brick wall, photorealistic.

Close-up of a large polished aluminum sheet in a dusty industrial workshop with blurred machinery in the background.

A black rectangular prism with a sloped top and cut-outs against a light blue gradient background, minimalist 3D render.

Labeled diagram of a double pulley system showing fixed and movable blocks, rope, load, force, and 4:1 advantage.

Close-up of a technician's hands using a feeler gauge to measure the gap between two metal parts in an industrial setting.

Close-up of a brushed silver aluminum sheet with semicircular cutouts along the edge, reflecting light.

Photorealistic studio shot of a shiny metal bolt, a split lock washer, and multiple flat washers on a gray background.

A long brown cardboard tube with a transparent plastic window showing several white balls inside, on a white background.

A brushed metal cylinder with a rectangular cutout on its top surface, set against a grey background.

A photorealistic rendering of a silver metallic cylinder with a textured band, resting on a reflective surface.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

3D render of thixomolding process: molten magnesium flows into an industrial mold with explanatory labels.

Isometric exploded diagram of a wooden cupboard, showing its components for assembly.

A detailed sketch of a square mahogany live edge table with metal corner accents, featuring prominent wood grain.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

Technical drawing of an oak soffit ventilator with dimensions and routed grille details.

Photorealistic image of a metal plate with three distinct weld beads, with a blurred industrial workshop in the background.

A technical colored sketch of a .50 BMG bullet with a brass tip, copper jacket, four ports, and a tungsten insert, labeled with dimensions and specifications.

A realistic solar panel with wires on a mound against a faint, designer sketch background.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

Technical illustration of a vertical PVC pipe air filter with zeolite granules, a mesh screen, and a 5V USB fan, showing airflow and dimensions.

Two light-colored plywood boards, labeled '1320' and '580', stacked on a wooden table in a warm-lit workshop.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

A photorealistic, minimalist three-tier stepped rectangular base in satin bronze.

Close-up photorealistic image of a welding torch creating sparks on carbon steel joints, with several finished welds visible.

An illustration of a silver ladder leaning against a wall, forming the hypotenuse of a right triangle with a 70-degree angle at the base.

An instructional diagram shows a person in a face shield and gloves unloading biochar from a horizontal retort kiln into bins. Labels indicate cooling and finished product.

A technical diagram of an energy-generating bench with piezoelectric layers, a spring-dynamo mechanism, an electronic module, battery, and USB output.

Close-up, photorealistic image of a 7/8 inch metal bolt with a lock washer, a flat washer, and a thicker flat washer, all stacked on a brushed metal surface.

A photorealistic image of a thin, weathered metal strip leaning diagonally on a textured concrete floor in a dark, empty industrial room.

A hand-drawn free body diagram on graph paper shows a 250kg block with a 150N force arrow to the east and a 350N force arrow 45 degrees south of west.

A 3D isometric sketch of an industrial A-frame structure with chains and caster wheels, set in a workshop.

A scientific diagram illustrating cement hydration phases, polymer and admixture interaction modes like adsorption, intercalation, ionic exchange, and their macroscopic performance including yield stress and durability. A feedback arrow highlights bio-based polymers vs synthetic PCEs.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

A simplified conceptual diagram of a forest with three labeled layers: canopy, trunk, and ground.

A four-panel grid displays different metallic textures: smooth aluminum, rough cold-rolled steel, speckled galvanized steel, and polished stainless steel.

A close-up, photorealistic shot of a metallic, truncated conical piece with a bore through its axis and two perpendicular grooves.

Technical illustration detailing the creation of ceramic armor, showing raw powders, sintering, ceramic discs, a bullet impact, and an armored vehicle.

A detailed cross-section diagram of a monitoring well, showing ground surface, casing, drilled hole, bentonite seal, sand pack, and screen with depth measurements.

A brushed metal L-shaped bracket with dimensions 210mm high, 80mm wide, and 900mm long, shown on a grey background.

Technical illustration of a no-drill surface mounting system with labeled components.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

An infographic titled 'Metal Bracket Forming Processes' comparing stamping, laser cutting, CNC machining, and progressive die methods with pros, cons, and use cases.

A collection of various metal industrial profiles including tubes, angle steels, channel steels, and I-beams on a white background.

A simple line diagram of structural engineering elements, including cross bracing, a damping system, and base isolation.

Two light brown wooden blocks, one resting on top of another, with a rectangular cutout in the lower block, on a dark brown surface.

A long, gray PVC pipe lies on a dark workbench in a workshop, with other metal tools visible around it.

Diagram of a concrete catch basin with inlet and outlet pipes, sediment trap, and removable cover.

An isometric technical drawing shows a cardboard box filled with layers of aluminum discs, resting on a wooden pallet, with dimensions annotated.

A photorealistic image of a light brown wooden Euro pallet on a white background.

An infographic comparing wood-based paper and stone-based paper, showing icons for their origins and properties.

Isometric technical illustration of a single-pipe heating system with a boiler, main pipe, three radiators, and a return pipe.

Close-up of a wooden table with a square metal centerpiece and a brushed metal leg, lit by sunlight.

A large, grey industrial tensile testing machine stands in a well-lit laboratory, featuring a central test setup and a digital control screen.

Close-up of a technician's hands using a feeler gauge to measure a gap between metal parts in an industrial setting.

A schematic illustration of two large industrial tanks. One tank on the left is filled with water and labeled '650 L'. The tank on the right is empty except for several concrete samples at its base and is labeled '100.mn'. A hose connects a submersible pump in each tank to the other tank.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.