Erstellen

Studio

Hintergrund entfernen

Suchen

Meine Bilder

Auf Pro upgraden

Registrieren

Detailed technical drawing of a capstan cylinder system with labeled components including thread, block, round shaft, and screw jaws, on grid paper.

Detailed technical drawing of a capstan cylinder system with labeled components including thread, block, round shaft, and screw jaws, on grid paper.

Seitenansicht: Faden | ┌─────────────┐ ← Block │ ███ │ ← Capstan-Zylinder └─────────────┘ || || ← Rundschaft Ø12 mm, Länge 25 mm || ← in Schraubbacken eingespannt Mehr sehen

#technical drawing #mechanical engineering #diagram

More images like this

Technical drawing of a roller mechanism with a motor, timing belt, pulleys, and a hinged arm, showing motion arrows.

Physics diagram showing a hand pulling a string, an elastic, and a block 'M' on a frictionless table with velocity 'v', labeled 'L'.

Detailed diagram of a square taper bicycle bottom bracket with exposed bearings, rendered in a mechanical sketch style.

Grayscale illustration of a mechanical roller machine with a motor, multiple staggered rollers, and a hinged lifting arm on a rectangular frame.

Simple illustration of an electrical circuit with a 12V power supply and a resistor.

3D rendering of a standing wave on a string, labeled with lambda for wavelength, A for antinode, and N for node.

A hand-drawn doodle of a CPWG PCB cross-section, showing signal and ground traces with dimensions W, S, H, and associated characteristic impedance formulas handwritten next to it.

A black and white sketch of an industrial TX valve.

Close-up illustration of a slip ring's inner workings, showing gray brushes making contact with a golden ring, connected by orange and blue wires.

A diagram of an electrical circuit with a 9V battery, a resistor, a red LED, and a blue LED connected by wires.

Isometric view of an industrial machine with a feeding system, conveyor belt, inspection stations, and discharge, in an engineering drawing style.

A close-up, photorealistic shot of a metallic, truncated conical piece with a bore through its axis and two perpendicular grooves.

A detailed cutaway view of a metal bolt screwed into a nut, with 85% of the non-contact threads highlighted in red.

Hand-drawn isometric sketch of a Minecraft cauldron with water ripples, a dripstone block above, and a falling water drop.

Close-up of a technician's hands using a feeler gauge to measure a gap between metal parts in an industrial setting.

Scientific diagram illustrating a standing wave with labels for node, antinode, and wavelength, and a traveling wave below.

A trigonometry diagram showing a hotel, a tower, and a milestone along a road. Angles of elevation to the tower's top from the hotel (20 degrees) and a milestone (11 degrees) are marked. Distances are labeled.

A detailed stickerbomb collage of various golden and silver keys, padlocks, and locksmith tools, with German text labels like "TRESORÖFFNUNG".

Two metallic square scientific measurement devices with digital displays, connected by a cable, on a grey desk with German text overlay.

Hand-drawn diagram: an arc arrow goes from A to B. Above, C in a box with 'Die Bewertung macht's' below.

Photorealistic technical illustration of a stainless steel three-way control valve with high-pressure water flow and a hydraulic circuit diagram.

A schematic illustration of two large industrial tanks. One tank on the left is filled with water and labeled '650 L'. The tank on the right is empty except for several concrete samples at its base and is labeled '100.mn'. A hose connects a submersible pump in each tank to the other tank.

Technical illustration of a no-drill surface mounting system with labeled components.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

Detailed cross-section of a slip ring showing golden brushes making contact on a polished gold ring within a dark metallic housing.

Physics diagram illustrating Newton's second law, showing a sphere labeled M with force F, resistance R, and acceleration a, alongside the equation F=Ma.

A black and white diagram illustrates an egg cracking mechanism with a motor, cranks, coupler link, plunger, and pivoting arms, labeled with forces and components.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

Blueprint-style drawing of a wrist-mounted futuristic gadget with a nozzle and trigger, with a hand wearing it. Section view and dimensions are shown.

A metallic square peg standing in the center of a metallic round hole, illuminated by blue and pink light.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

Minimalist diagram illustrating a hydroelectric dam with a reservoir, dam, turbine, and generator labeled.

A technical illustration in a sketch style shows a 3-point beam setup with a dial gauge measuring its deflection. Glowing digital displays show '1,5 V' and '4,2 V' on a circuit board background.

Black-and-white line drawing of a prosthetic arm with a quick-swap socket, a drill attachment, and a circular saw blade.

An illustrated electrical circuit diagram with a battery, lightbulb, resistors, switches, and inductor coils on a parchment-like background.

A technical colored sketch of a .50 BMG bullet with a brass tip, copper jacket, four ports, and a tungsten insert, labeled with dimensions and specifications.

Young apprentice observes a robotic arm working at an industrial machine, with 'ORIENTIERUNG & METHODEN' text. Illustrative style.

Black-and-white scientific diagram of a simple pendulum experiment with labeled components like bob, string, photogate, and timer.

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

Black and white line art illustration of a CNC router carving a swirling pattern into wood.

A black and white geometric diagram showing the construction of an angle bisector using a compass and straightedge, with points A, B, D, E, F labeled.

Isometric line art pictogram of an industrial copper pipe drawing machine with 'PSW' label.

A labeled diagram illustrating a rack and pinion mechanism connecting to a larger gear, drawn in a sketch style.

Labeled diagram of a double pulley system showing fixed and movable blocks, rope, load, force, and 4:1 advantage.

A detailed technical drawing of a complex mechanical part, shown in cross-section and various views, rendered on grid paper.

Blueprint-style drawing of a gray box with an opening on top, showing multiple views and dimensions on a blue grid.

Pencil sketch of an isometric cube frame with bolted corner joints on a white background.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

Geometric diagram showing angle construction using a compass on grid paper, labeling angles C and D.

Grayscale technical illustration of automatic bolt cutters with an electric motor and visible internal gears.

Scientific diagram illustrating different magnet configurations and magnetic fields. Includes a ring magnet, a U-shaped magnet, and interacting disc magnets.

Technical illustration detailing the creation of ceramic armor, showing raw powders, sintering, ceramic discs, a bullet impact, and an armored vehicle.

A technical illustration of a shiny metallic gear and linkage mechanism on a light background.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

A physics diagram illustrating Newton's second law, showing a grey cube labeled M, a force vector F, an acceleration vector a, and the equation F=M a.

A gray scientific spectrophotometer machine with a digital screen, colored buttons, and connected wires, in a clip art style.

A blueprint style drawing of an aquarium lid with a pin art panel and filter tubes on a blue grid.

A simple black and white line drawing of a flow cytometry diagram, showing cell shapes, a scatter plot, and process arrows.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

A technical illustration of a mechanical water level indicator with a ping pong ball float, nylon thread, pulley, and a pointer on a circular dial with red, yellow, and green zones.

A hand-drawn free body diagram on graph paper shows a 250kg block with a 150N force arrow to the east and a 350N force arrow 45 degrees south of west.

Hand-drawn free body diagram of a person doing a backflip, showing force vectors and velocity.

Detailed line art sketch of an automatic bolt cutter on a base, with visible internal gears and a handle.

A silver metallic torsion spring mechanism with a long rod on a clean white background.

Detailed pencil drawing of a suction cup, labeled with its dimensions including 30mm diameter, 11mm height, and an R10 radius.

A technical line drawing of a 6-axis FANUC industrial robot arm with a suction cup tool, shown with 3D coordinate axes and dimensions.

Scientific illustration showing electric field lines originating from two red positive charges and converging on a blue negative charge.

A robot in a lab coat precisely working on a circuit board with tools, in a technical sketch style.

A long brown cardboard tube with a transparent plastic window showing several white balls inside, on a white background.

Isometric engineering drawing of an industrial machine with a conveyor belt, feeding system, and inspection stations.

A technical diagram of an energy-generating bench with piezoelectric layers, a spring-dynamo mechanism, an electronic module, battery, and USB output.