Erstellen

Studio

Hintergrund entfernen

Suchen

Meine Bilder

Auf Pro upgraden

Registrieren

Black and white schematic diagram of a face-in-hole photo board. It shows a fixed front panel, upper and lower rods, and a hand flipping a panel with a hinge and peg.

Black and white schematic diagram of a face-in-hole photo board. It shows a fixed front panel, upper and lower rods, and a hand flipping a panel with a hinge and peg.

Schematic side view of a face-in-hole photo board (tantamarresque), front thick panel fixed, several thin panels behind it mounted on top and bottom rods, a hand flipping one of the thin panels, black and white, minimalistic style, no people, instructional assembly diagram Mehr sehen

#diagram #instructional #technical #technical illustration

More images like this

Technical drawing of a square panel with dimensions, folded edges, a slot, and a back view.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

A black and white line drawing depicts three scenes: an automated warehouse system delivers a tote to a person, a person picks an item from a tote, and a person places an item into a box.

An isometric sketch of a corner room featuring a wooden paneled wall with a hinged door and a cinder block wall with a sliding glass door. Dimensions are marked on the floor.

A clean line drawing of a clear, square plastic food storage container with a lid.

A black and white technical drawing of a small greenhouse with measurements and labels for OSB and plastic sheathing.

Schematic diagram of a wall, 4m wide and 3m tall, with a 2m wide window and wooden planks, displaying dimensions.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

Black and white engineering drawing of a 100mm diameter, 10mm high disc with eight 6mm holes, showing top and side views with dimensions.

A white square shape with a small semi-circle attached to the end of each of its four corners, all on a plain grey background.

Technical illustration of a vertical PVC pipe air filter with zeolite granules, a mesh screen, and a 5V USB fan, showing airflow and dimensions.

A clear diagram showing the internal wiring of a UK electrical plug, connecting Earth, Neutral, and Live wires to the pins and fuse.

Photorealistic close-up of a white electrical outlet on a white wall, with one of the top holes shaped like a heart.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

A minimal black and white line art diagram of a landscape-oriented sheet of paper with four hatched lines drawn across it.

A blueprint-style diagram illustrating a mechanical latching system with labeled components including a hook arm, mounting block, cam lock, and optional spring.

A pencil drawing on white paper shows a rectangle labeled 15cm by 7cm next to an unlabeled square, with a pencil resting below.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

A sketch-style technical drawing of a rectangular box with internal shelves and labeled dimensions.

A technical line drawing illustrating the construction details of a Rouge valley roof, including flashing, jack rafters, and valley rafters.

Diagram of a vertical column with inward arrows labeled 'Compression Force' and the label 'In Compression' below.

Three side-by-side simple illustrations of mailboxes with open lids and raised red flags. The first is an outline drawing, the second has a grey interior, and the third is entirely grey.

Isometric technical drawing of a beach volleyball court under construction, showing ground preparation, excavation, and drainage pipes.

A detailed technical illustration of a 1 1/2 inch pipe connecting to a 4-inch pipe with a labeled 90-degree elbow fitting.

A detailed blueprint drawing of a metal door, complete with dimensions and labels, on a gridded background.

Isometric exploded diagram of a wooden cupboard, showing its components for assembly.

Technical drawing of a cylindrical plate with multiple holes, showing top and side views with dimensions for diameter, height, and hole size.

A detailed sketch of a silver cable organizer with black and blue cables neatly stored inside.

A pencil sketch of an electrical wiring diagram for a UK plug socket on graph paper, labeled 'KEVIN'S NEW PLUG' with wires.

Technical drawing of an oak soffit ventilator with dimensions and routed grille details.

Technical drawing of a roller mechanism with a motor, timing belt, pulleys, and a hinged arm, showing motion arrows.

Black and white line icon of a stack of fanfold labels.

A technical blueprint drawing of a horizontal rotating ferris wheel shelf with four vertically stacked tiers, each holding a vintage computer, shown in front and side views with labels.

Line drawing of a shed or pavilion with a pitched roof, showing dimensions for width, height, and roof pitch.

A blueprint style drawing of an aquarium lid with a pin art panel and filter tubes on a blue grid.

Isometric technical illustration of a single-pipe heating system with a boiler, main pipe, three radiators, and a return pipe.

A simple black line drawing of a cylinder on a white background.

2D technical drawing of a trailer hitch cargo rack with dimensions 25", 45", 2", and -.5" labeled.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

A technical schematic illustration of a dual-function window blind that incorporates a whiteboard and a projector screen.

Technical illustration of a corner lamp system with a floor spotlight and a 45-degree mirror reflecting light along the ceiling.

Isometric black and white line drawing of a modern outdoor stage with arches and stairs.

Sketch of a residential plumbing plan showing a toilet, shower, and sink with waste pipes and sizes leading to a sewer.

An illustration of a wooden laptop cooling stand with dimensions and electrical components labeled, including two fans, a PWM module, and a 12V laptop adapter.

Technical sketch of a light plywood cat climbing and hiding shelf for a camper van, showing multiple views and ventilation.

Pencil sketch of a hand inserting an RFID key card into a hotel door lock.

Diagram showing common electrical hazards in a home: improperly connected wires, poorly secured cables, and overfilled circuit breakers.

Illustration of a wooden and metal kitchen island with an integrated sink, showing dimensions of 48" L x 24" W x 36" H.

A detailed diagram illustrating the wiring of an electrical plug, showing connections for neutral, live, and earth wires.

A grayscale sketch of three UK electrical plugs inserted into a power strip on a wooden surface.

A black and white cross-sectional technical drawing of a cylinder liner, showing dimensions labeled D, d, H, and t.

A simple black-and-white line art icon of a roll of medical tape with a strip extending from it.

A detailed technical sketch of a rectangular box or cabinet with a single internal shelf, showing various dimensions and measurements with arrows.

Black and white line art of a slightly open door with a tall, human-like shadow leaning inward from behind it.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

Blueprint-style drawing of a gray box with an opening on top, showing multiple views and dimensions on a blue grid.

Black and white line art illustration of a CNC router carving a swirling pattern into wood.

A minimalist black and white diagram of a landscape-oriented sheet divided into 8 sections by hatched lines.

A technical diagram of a wooden cooling pad enclosure with two fans, a control module, and an adapter connection, showing dimensions and labels.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

A technical drawing on grid paper showing the top and side views of a mini golf course layout with dimensions labeled in centimeters. A scale of 1:50 is noted.

Technical illustration of a no-drill surface mounting system with labeled components.

A technical illustration of a mechanical water level indicator with a ping pong ball float, nylon thread, pulley, and a pointer on a circular dial with red, yellow, and green zones.

Line art drawing of a storage unit with shelves and drawers, in dark red outline on a light background.

An illustration showing a folded gray mesh drying rack next to an unfolded four-tier mesh drying rack, with "CAUTION!" text and a warning about sudden extension.

An isometric technical drawing shows a cardboard box filled with layers of aluminum discs, resting on a wooden pallet, with dimensions annotated.

A brushed metal L-shaped bracket with dimensions 210mm high, 80mm wide, and 900mm long, shown on a grey background.

Diagram of a concrete catch basin with inlet and outlet pipes, sediment trap, and removable cover.