Erstellen

Studio

Hintergrund entfernen

Suchen

Meine Bilder

Auf Pro upgraden

Registrieren

A metal plumbing system featuring a vertical drainpipe labeled 'bajante' and a 45-degree branch pipe labeled 'derivaci 0xF3n 45 0xB0' on a white wall.

A metal plumbing system featuring a vertical drainpipe labeled 'bajante' and a 45-degree branch pipe labeled 'derivaci 0xF3n 45 0xB0' on a white wall.

derivación tubería desagüe 45º, tuberia de desagüe vertical (bajante) con una inserción a 45º Mehr sehen

#plumbing #construction #pipes

More images like this

An illustration of silver pipes forming a complex U-shaped structure, with a horizontal measurement indicating 20 cm below them.

A technical drawing on grid paper showing the top and side views of a mini golf course layout with dimensions labeled in centimeters. A scale of 1:50 is noted.

A rainwater harvesting system with gray pipes on a stone wall, directing water into three metal barrels with green plants.

An isometric sketch of a silver galvanized industrial A-frame structure with chains and caster wheels in a workshop.

Vintage technical drawing of a water pipe with threaded ends, labeled 'Water Pipe' and dimensions '21.5 cm' and '1"'.

Exploded view diagram illustrating the installation order of mechanical parts including flanges, gaskets, and housing components.

Shiny silver utility duct cladding pipes on a dark surface in a blurred industrial setting.

A photorealistic image of a steel nut suspended inside a clear glass test tube in a laboratory setting.

Exploded view diagram of an alkaline water electrolyzer cell assembly with grey plates, red foam, and a white membrane.

Modern aluminum fence, linear drainage grate, and gray square pavers against a deep blue background.

Close-up of a building corner with corrugated metal roof, gray siding, and a window frame, showing sealant.

An illustration of a silver ladder leaning against a wall, forming the hypotenuse of a right triangle with a 70-degree angle at the base.

An illustration of a drip irrigation system in an orchard with two large water drums, pipes, connectors, a pressure regulator, and labels indicating component names and sizes.

A photorealistic render of a silver cylindrical metal cage with a grid pattern and three mounting tabs on a reflective surface.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

A detailed blueprint drawing of a metal door, complete with dimensions and labels, on a gridded background.

A 2D minimalist floor plan of a small attic bedroom with dimensions, an inward-opening door, and a built-in wardrobe.

Isometric black and white line drawing of a modern outdoor stage with arches and stairs.

A 3D render of a drill bit boring vertically through colorful horizontal geological layers in the earth.

A light gray PVC pipe lies on a matching gray surface, showing its hollow interior.

A cross-section engineering illustration of an underground valve well, showing a blue valve on a pipe inside concrete walls with a 2m depth.

Detailed cutaway illustration of an underground valve well with a pipe, valve, electrical box, and manhole cover in a grassy setting.

Illustration of two poles, 50m and 1m tall, 1m apart, with an 80m sagging rope between their tops in a field.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

A 3D isometric sketch of an industrial A-frame structure with chains and caster wheels, set in a workshop.

A technical drawing of a door with dimensions 90 cm wide, 200 cm high, and a slanted bottom from 2.5 cm to 1.7 cm.

A photorealistic 3D render of silver industrial pipes, valves, and flanges arranged to form the number 7, against a blurred blueprint background.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

Close-up of a silver metal adjustable bracket bolted to a wooden post, supporting a horizontal wooden beam under a cloudy sky.

A photorealistic image of a brushed metal post with three horizontal cables, measured at 40 inches tall.

Schematic diagram of a wall, 4m wide and 3m tall, with a 2m wide window and wooden planks, displaying dimensions.

Photorealistic studio shot of a shiny metal bolt, a split lock washer, and multiple flat washers on a gray background.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

Angled view of a white smoke detector amidst shiny metal pipes on a white ceiling, industrial aesthetic.

A large grey metal pipe spool with flanges on a table in a workshop, with tools and blueprints.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

A grey PVC pipe elbow against a blurred industrial background.

Four shiny copper pipes extend through a white ceiling, bending downwards against a light gray wall with a window shadow.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

A detailed sketch of a silver cable organizer with black and blue cables neatly stored inside.

A metal hoe with a wooden handle rests against a grey pole, surrounded by other poles and water droplets on a light pink surface, in a 2D cartoon style.

A collection of various metal industrial profiles including tubes, angle steels, channel steels, and I-beams on a white background.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

Close-up of three shiny metallic tubes, two with interlocking mechanisms and one with a hole, ready to connect.

An empty modern room with a white Knauf ceiling, featuring perimeter hidden LED lighting and a central light line, with measurements '21 m' and '15 cm' and 'Knauf' labeled.

A long, gray PVC pipe lies on a dark workbench in a workshop, with other metal tools visible around it.

Technical drawing of a 74x60 metal building frame, showing side and top views.

A black rectangular prism with a sloped top and cut-outs against a light blue gradient background, minimalist 3D render.

Close-up of a circular chrome drain on a white, minimalist surface.

A white barn-style sliding gate with horizontal slats and black top-mounted hardware, flanked by two matching fence panels.

A detailed architectural sketch of a covered outdoor walkway with transparent roof and panels, showing dimensions and structural elements.

Two construction workers operate a drilling rig installing a ground anchor, with a cross-section of earth layers visible.

Photorealistic image of gray PVC pipes crisscrossing in a concrete room, with water droplets and fluorescent lights.

A shiny aluminum tube is mounted perpendicularly on a square metal base plate, set against a concrete background.

A technical line drawing depicting a double busbar switchgear system fed from two transformers.

A bright yellow safety handrail is bolted securely to the floor in a professional cartoon sketch style.

Technical illustration of a half umbrella canopy with a pulley system and a round pole on a blue background.

A brushed metal L-shaped bracket with dimensions 210mm high, 80mm wide, and 900mm long, shown on a grey background.

Sketch of a residential plumbing plan showing a toilet, shower, and sink with waste pipes and sizes leading to a sewer.

Close-up of glass panels and concrete building facade with sealant in the joints, against a blue sky with clouds.

Technical drawing of a cylindrical plate with multiple holes, showing top and side views with dimensions for diameter, height, and hole size.

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.

An isometric sketch of a corner room featuring a wooden paneled wall with a hinged door and a cinder block wall with a sliding glass door. Dimensions are marked on the floor.

Technical illustration of a corner lamp system with a floor spotlight and a 45-degree mirror reflecting light along the ceiling.

Isometric 3D render of a high-detail railway axle ultrasonic testing system with wheels on rollers and an overhead gantry.

A clear, labeled diagram illustrating the internal wiring of a UK 3-pin electrical plug, showing live, neutral, and earth connections.

Pencil sketch of three toilet cubicles with dimensions 2580mm and 7228mm marked.

Close-up of a wooden table with a square metal centerpiece and a brushed metal leg, lit by sunlight.

A W-truss diagram on a dark blueprint grid, labeled with 7:12 pitch and 9' span.

A photorealistic industrial design render of a "Knife-Light Pole" with a clear polycarbonate sleeve and solar panel cap, standing in a tiled urban plaza.

A black and white cross-sectional technical drawing of a cylinder liner, showing dimensions labeled D, d, H, and t.