A detailed mechanical engineering blueprint showing three orthographic views of a workshop dust collector modification, featuring blue lines on a white background with technical dimensioning and annotations.

A detailed mechanical engineering blueprint with 3 orthographic views showing a workshop dust collector modification (Thien Baffle for Holzkraft ASA 1901), clean line art style, blueprint blueprint style with a clean white background, dark blue lines and clear technical dimensioning annotations in millimeters (mm).View 1: Top-down view (Draufsicht) of a circular wooden disc baffle.Outer diameter is labeled as "Ø 408 mm".A central pilot hole is labeled as "Ø 45 mm".Along the outer edge, there is a circular cutout slot (drop-slot) that spans exactly a 240-degree arc.The width of this outer slot is clearly dimensioned and labeled as "30 mm".The remaining 120-degree arc of the perimeter is solid wood, labeled as "Solid Deflector Area (120°)".View 2: Sectional side view (Seitenansicht) of the vertical dust collector assembly.At the top: A tall cylindrical cartridge filter labeled as "Filter Cartridge, Height: 1000 mm, Outer Ø: 410 mm".In the middle: A steel housing drum labeled as "Main Steel Housing, Height: 250 mm".On the left side of this drum: A round air inlet pipe labeled as "Tangential Inlet Ø 203 mm".Inside the drum: The horizontal wooden baffle disc is shown installed horizontally. The vertical distance from the bottom edge of the 203mm inlet pipe down to the top surface of the wooden baffle is clearly dimensioned and labeled as "40 mm gap".At the bottom: A large collector bag hanging down, labeled as "Dust Collection Bag, Length: 1100 mm, Volume: 110 L".View 3: Ver mais