A blueprint schematic on a blue grid background showing three white line drawings of a mechanical device: a base, a vertical rod with a clamp, and a tilted tube in a cup.

An ultra-simple 2D technical blueprint schematic, disassembly instruction guide style, dark blue background with fine white grid lines, clean white line art. The drawing is split into three separate parts side-by-side with zero text. Part 1 (Left): Shows only the detached bottom base. A flat 10x10x10 cm square block sitting flat on the ground with four flat horizontal metal rectangular tubes attached to its sides as feet. Five parallel metal pin bolts protrude straight up from the top of this block. Part 2 (Center): Shows only a 1-meter vertical rod. At the absolute bottom end, it has five empty sleeve holes aligned to slide onto the pins below. At the absolute top end of this rod sits a simple pivot joint clamp with a quick-release lever handle. Part 3 (Right): Shows only a long 1.5-meter aluminum launch tube tilted at a sharp 80-degree angle. The clamp joint grips the tube unevenly: the left side of the tube is much shorter than the right side. Wrapped around the bottom of the shorter left side is a wide but short 30cm tall transparent glass cup with a massive 20cm diameter. The long launch tube sticks far out of the top of the cup. Highly clean, minimalist geometric line drawing. Strictly no text, no words, no letters, no rockets, no spaceships, no weapons. Ver mais