Estudio

Actualizar a Pro

Iniciar Sesión

Registrarse

A line art patent drawing of an inverted cup attached to a spout pouch nozzle, with a red arrow pointing down.

A line art patent drawing of an inverted cup attached to a spout pouch nozzle, with a red arrow pointing down.

Patent drawing of AN1 Top-Load. Cross-section: cup attached upside-down over a spout pouch nozzle. Open rim of inverted cup locks onto expanded horizontal flange at absolute bottom of nozzle. Red vertical arrow points down at cup base (facing upward), showing force bypassing inner cap, traveling down cup walls to nozzle base. Line art, white background, grid. Ver más

#technical drawing #diagram #illustration

More images like this

A clean line drawing of a clear, square plastic food storage container with a lid.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

Technical drawing of a cylindrical plate with multiple holes, showing top and side views with dimensions for diameter, height, and hole size.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

Two white belts, one laid out in a wavy shape and another coiled in a circle, in a clean vector-style illustration on a light grey background.

A black outlined triangle, a blue arrow, and a light gray outlined triangle with shadow illustrating geometric translation.

A simple line drawing of a car from a top-down view.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

A black and white cross-sectional technical drawing of a cylinder liner, showing dimensions labeled D, d, H, and t.

A black and white circuit diagram showing a voltage source connected to a 10 Ohm resistor and a 40 Ohm resistor in parallel.

A photorealistic render of a silver cylindrical metal cage with a grid pattern and three mounting tabs on a reflective surface.

A detailed sketch of a bicycle handlebar with a sleek, modern bike light and storage unit, cityscape background.

A black circle with a double outline on a white background.

A sketch-style technical drawing of a rectangular box with internal shelves and labeled dimensions.

A black and white geometric diagram showing the construction of an angle bisector using a compass and straightedge, with points A, B, D, E, F labeled.

An isometric illustration of a blue telescope with a black end, facing upwards, with the lens visible.

Technical drawing of a square panel with dimensions, folded edges, a slot, and a back view.

Black and white technical sketch of a machine with a square feeder, a hopper, and a long pipe extending right with dimension labels.

A technical drawing on grid paper showing the top and side views of a mini golf course layout with dimensions labeled in centimeters. A scale of 1:50 is noted.

Technical illustration of a no-drill surface mounting system with labeled components.

A realistic solar panel with wires on a mound against a faint, designer sketch background.

A technical blueprint drawing of a horizontal rotating ferris wheel shelf with four vertically stacked tiers, each holding a vintage computer, shown in front and side views with labels.

A 2D pixel art sprite sheet featuring 8 different battery types, including car, marine, power tool, laptop, UPS, scooter, server, and damaged industrial batteries, on a white background.

An isometric sketch of a silver galvanized industrial A-frame structure with chains and caster wheels in a workshop.

Detailed pencil drawing of a suction cup, labeled with its dimensions including 30mm diameter, 11mm height, and an R10 radius.

Simple illustration of an electrical circuit with a 12V power supply and a resistor.

A simple black and white line drawing of a flow cytometry diagram, showing cell shapes, a scatter plot, and process arrows.

A white square shape with a small semi-circle attached to the end of each of its four corners, all on a plain grey background.

Blueprint-style drawing of a gray box with an opening on top, showing multiple views and dimensions on a blue grid.

A minimalist black and white icon featuring a rounded square next to three horizontal lines.

A black and white outline of a battery icon with a grid inside.

Hand-drawn isometric sketch of a Minecraft cauldron with water ripples, a dripstone block above, and a falling water drop.

Top-down schematic diagram of a classroom layout with a central table, and desks with computers along the left and right walls. A door is in the front-left, and a network rack in the back-right.

Isometric technical drawing of a beach volleyball court under construction, showing ground preparation, excavation, and drainage pipes.

A technical sketch showing a delivery truck with an open bi-folding rear ramp, accompanied by multiple detailed drawings of the ramp mechanism.

An isometric sketch of a corner room featuring a wooden paneled wall with a hinged door and a cinder block wall with a sliding glass door. Dimensions are marked on the floor.

Isometric black and white line drawing of a modern outdoor stage with arches and stairs.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

Three side-by-side simple illustrations of mailboxes with open lids and raised red flags. The first is an outline drawing, the second has a grey interior, and the third is entirely grey.

A detailed product design sketch of a black travel mug with a red band, dark lid, and a flip-top opening, on a white background with pencil lines.

A neon green AutoCAD-style technical drawing on a black background, showing a rectangular steel mesh panel with dimensions and mounting holes.

Pencil sketch of a scooter's rear wheel and rectangular LED taillight, with '44mm' dimensions marked.

A bright yellow safety handrail is bolted securely to the floor in a professional cartoon sketch style.

A simple black line drawing of a cylinder on a white background.

A 3D isometric sketch of an industrial A-frame structure with chains and caster wheels, set in a workshop.

A pictogram illustration of a Power over Ethernet setup, showing an Ethernet cable connecting two black and white devices with yellow accents.

Technical illustration of a corner lamp system with a floor spotlight and a 45-degree mirror reflecting light along the ceiling.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

Black and white line art of a PAR64 stage light, presented as a schematic technical drawing in a simplified vector style.

A photorealistic industrial design render of a "Knife-Light Pole" with a clear polycarbonate sleeve and solar panel cap, standing in a tiled urban plaza.

Isometric view of an industrial machine with a feeding system, conveyor belt, inspection stations, and discharge, in an engineering drawing style.

Black and white line drawing of a car with a 4-sided umbrella-like damage protection system mounted on its roof, in a technical sketch style.

A detailed sketch of a silver cable organizer with black and blue cables neatly stored inside.

Technical illustration of a half umbrella canopy with a pulley system and a round pole on a blue background.

A blueprint style drawing of an aquarium lid with a pin art panel and filter tubes on a blue grid.

A technical line drawing depicting a double busbar switchgear system fed from two transformers.

Black and white engineering drawing of a 100mm diameter, 10mm high disc with eight 6mm holes, showing top and side views with dimensions.

A schematic illustration of two large industrial tanks. One tank on the left is filled with water and labeled '650 L'. The tank on the right is empty except for several concrete samples at its base and is labeled '100.mn'. A hose connects a submersible pump in each tank to the other tank.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

Technical drawing of a roller mechanism with a motor, timing belt, pulleys, and a hinged arm, showing motion arrows.

A simple black and white line art illustration of a happy spark plug wearing round glasses.

Line art schematic of a moving head stage light with a screen on its side, isolated on a white background.

A long brown cardboard tube with a transparent plastic window showing several white balls inside, on a white background.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

Isometric exploded diagram of a wooden cupboard, showing its components for assembly.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

A detailed sketch drawing of a small, rectangular, metallic clip-on light with two glowing bulbs.

A photorealistic rendering of a rectangular silver tobacco tin with a black vacuum pump stick and a grommet, on a transparent background.

Detailed sketch of a modern bike light and storage unit integrated into handlebars, featuring gray and white components.

Line drawing of a shed or pavilion with a pitched roof, showing dimensions for width, height, and roof pitch.

A detailed, photorealistic render of a metallic grey engine mount against a smooth blue-grey background.