Photorealistic image of a temporary event structure ballast unit with a central metal truss, supported by steel pillars and concrete blocks, elevated on screw-jack feet on a tarmac surface.

A wide-angle, highly accurate photorealistic engineering photograph of a temporary event structure ballast unit. The base is a flat, dark grey rectangular steel chassis made of UNP 140 channel beams, exactly 2.3 meters long and 95 centimeters wide. On the four outer corners of this frame, four vertical square steel pillars rise up to a height of 110 centimeters. Inside the frame compartments, on both the left and right sides of the center, a stack of two Schake 600kg cubic concrete ballast blocks (measuring 80x80x50cm each) are stacked two-high, creating a total ballast height of 100cm per side. From the exact center of the steel base, between the two concrete stacks, a vertical silver-colored Prolyte H40V aluminum square truss column rises straight up to a total height of 5 meters. Crucially, from the absolute top of the 110cm steel corner pillars on the outer corners, two extremely long, heavy-duty silver Riggatec cornerbrakes with an exact and prominent length of 2.0 meters run far upwards at a wide diagonal angle. These long 2-meter Riggatec braces span high over the concrete blocks and clamp tightly onto the main chords of the 5-meter vertical Prolyte H40V truss with professional aluminum half-couplers at a high point of 2.74 meters from the ground. The entire assembly is elevated on four heavy silver Schake screw-jack leveling feet on the outer corners. Clear daylight, professional industrial presentation, real-life event setup, highly detailed metal and concrete Ver más