Studio

Auf Pro upgraden

Registrieren

An illustration of a metal snap collar connected to an L-angle bracket, fixed to a textured ceiling slab.

An illustration of a metal snap collar connected to an L-angle bracket, fixed to a textured ceiling slab.

snap collar connect to the L angle bracket fixed to the ceiling slab Mehr sehen

#mechanical #construction #illustration

More images like this

Close-up of a silver metal adjustable bracket bolted to a wooden post, supporting a horizontal wooden beam under a cloudy sky.

Close-up of glass panels and concrete building facade with sealant in the joints, against a blue sky with clouds.

A bright yellow safety handrail is bolted securely to the floor in a professional cartoon sketch style.

Modern aluminum fence, linear drainage grate, and gray square pavers against a deep blue background.

A technical line drawing illustrating the construction details of a Rouge valley roof, including flashing, jack rafters, and valley rafters.

An isometric sketch of a corner room featuring a wooden paneled wall with a hinged door and a cinder block wall with a sliding glass door. Dimensions are marked on the floor.

A detailed sketch of a silver cable organizer with black and blue cables neatly stored inside.

A minimalistic white tower obstacle course with black suspended platforms and ladders, set against a clear blue sky and white ground.

A clean, modern ceiling with a grid system and several bright rectangular LED panel lights illuminating a white room.

Technical drawing of a cylindrical plate with multiple holes, showing top and side views with dimensions for diameter, height, and hole size.

Exploded view diagram of an alkaline water electrolyzer cell assembly with grey plates, red foam, and a white membrane.

A collection of various metal industrial profiles including tubes, angle steels, channel steels, and I-beams on a white background.

Black and white technical sketch of a machine with a square feeder, a hopper, and a long pipe extending right with dimension labels.

A modern parasol base with wood panels and a metal frame, sitting on a tiled patio with strips of green grass.

Close-up of a modern metallic roof with wooden battens under a clear blue sky.

Photorealistic studio shot of a shiny metal bolt, a split lock washer, and multiple flat washers on a gray background.

A construction worker in a blue uniform and tool belt stands on a scaffold, installing a large sheet of drywall in an unfinished room.

Isometric view of a building section with an electrical equipment room on the left and a classroom on the right, featuring exposed pipes and electrical panels on concrete walls, and wooden desks with glass partitions in the classroom.

A metal hoe with a wooden handle rests against a grey pole, surrounded by other poles and water droplets on a light pink surface, in a 2D cartoon style.

A shiny aluminum tube is mounted perpendicularly on a square metal base plate, set against a concrete background.

A black rectangular prism with a sloped top and cut-outs against a light blue gradient background, minimalist 3D render.

A realistic solar panel with wires on a mound against a faint, designer sketch background.

Technical drawing of a 74x60 metal building frame, showing side and top views.

A pencil drawing of a Fink truss structure with a 7:12 pitch and a 9-foot span.

A wooden terrace structure with red posts and a green tiled roof, built against a textured beige wall under a blue sky.

Close-up photorealistic image of textured metal plates, including shiny and scratched surfaces, on an industrial workbench.

Isometric black and white line drawing of a modern outdoor stage with arches and stairs.

Illustration of metal scaffolding against a light-colored building under a clear blue sky.

An illustration of a silver ladder leaning against a wall, forming the hypotenuse of a right triangle with a 70-degree angle at the base.

A multi-layered metal frame of a house under construction, with a concrete foundation, set in a grassy field under a blue sky.

A photorealistic wooden platform made of thick beams with metal brackets on a workshop floor, surrounded by wood shavings.

A photorealistic image of a brushed metal post with three horizontal cables, measured at 40 inches tall.

A detailed, photorealistic render of a metallic grey engine mount against a smooth blue-grey background.

A black and white line drawing of a four-blade ceiling fan hanging from a ceiling with a grid pattern.

Close-up of a building corner with corrugated metal roof, gray siding, and a window frame, showing sealant.

Technical illustration of a half umbrella canopy with a pulley system and a round pole on a blue background.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

A W-truss diagram on a dark blueprint grid, labeled with 7:12 pitch and 9' span.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

Close-up of a silver-gray cast metal connector joining two light wooden beams at a right angle, set against a blueprint background.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

A modern brown aluminum pergola with slatted roof, integrated circular lights, and a ceiling fan, set in a lush green garden.

A futuristic metallic light fixture with glowing vertical panels hangs from a grimy ceiling in an industrial or sci-fi building interior.

Raised wooden garden beds with green plants and colorful flowers, equipped with silver metal handrails, on a paved patio.

Close-up of a wooden table with a square metal centerpiece and a brushed metal leg, lit by sunlight.

A brushed metal L-shaped bracket with dimensions 210mm high, 80mm wide, and 900mm long, shown on a grey background.

Photorealistic close-up of a modern, light-gray laboratory module building with reflective windows and a metallic door on asphalt.

A detailed sketch of an industrial interior with steel trusses, beams, and a clerestory roof with skylights.

A detailed blueprint drawing of a metal door, complete with dimensions and labels, on a gridded background.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

Illustration of two poles, 50m and 1m tall, 1m apart, with an 80m sagging rope between their tops in a field.

A pile of black heavy-duty zip ties lies on a light-colored textured surface.

Two construction workers operate a drilling rig installing a ground anchor, with a cross-section of earth layers visible.

An isometric illustration of a green ping pong table with a net and white lines.

An isometric sketch of a silver galvanized industrial A-frame structure with chains and caster wheels in a workshop.

A 3D isometric sketch of an industrial A-frame structure with chains and caster wheels, set in a workshop.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

A technical line drawing depicting a double busbar switchgear system fed from two transformers.

Close-up of two solar panels on a dark sloped roof with aluminum mounting rails, seen with distant city buildings.

Photorealistic image of a brushed steel triangular prism frame on swivel casters on a concrete workshop floor.

A white barn-style sliding gate with horizontal slats and black top-mounted hardware, flanked by two matching fence panels.

Close-up of water-damaged white particle board from flatpack furniture, showing swollen ends and peeling surface.

A white square shape with a small semi-circle attached to the end of each of its four corners, all on a plain grey background.

A light gray PVC pipe lies on a matching gray surface, showing its hollow interior.

2D technical drawing of a trailer hitch cargo rack with dimensions 25", 45", 2", and -.5" labeled.

Isometric exploded diagram of a wooden cupboard, showing its components for assembly.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

A technical schematic illustration of a dual-function window blind that incorporates a whiteboard and a projector screen.

A modern outdoor carport or pavilion with a mahogany-stained wooden deck, concrete slab, and a low retaining wall with shrubs, set in a green lawn.

Isometric 3D render of a high-detail railway axle ultrasonic testing system with wheels on rollers and an overhead gantry.

A modern white carport over a brown driveway in front of a brick house with a garage and green lawn under a blue sky.

A detailed cross-section diagram of a monitoring well, showing ground surface, casing, drilled hole, bentonite seal, sand pack, and screen with depth measurements.