Studio

Auf Pro upgraden

Registrieren

Technical illustration of a bolt and metal bracket with an arrow showing insertion.

Technical illustration of a bolt and metal bracket with an arrow showing insertion.

draw instructions of inserting bolt into metal bracket in corner Mehr sehen

#illustration #technical drawing #mechanical #technical illustration

More images like this

Isometric exploded diagram of a wooden cupboard, showing its components for assembly.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

Photorealistic studio shot of a shiny metal bolt, a split lock washer, and multiple flat washers on a gray background.

A white square shape with a small semi-circle attached to the end of each of its four corners, all on a plain grey background.

A detailed 2D drawing of a tow hitch attached to the rear of an SUV.

A blue shaded triangle with angles labeled 120 degrees, 20 degrees, and 40 degrees.

An IKEA-style instruction manual showing steps to assemble a large IKEA store sign on a pole.

An isometric sketch of a corner room featuring a wooden paneled wall with a hinged door and a cinder block wall with a sliding glass door. Dimensions are marked on the floor.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

A W-truss diagram on a dark blueprint grid, labeled with 7:12 pitch and 9' span.

Technical drawing of a roller mechanism with a motor, timing belt, pulleys, and a hinged arm, showing motion arrows.

Illustration of a wooden and metal kitchen island with an integrated sink, showing dimensions of 48" L x 24" W x 36" H.

A simple black and white line drawing of a flow cytometry diagram, showing cell shapes, a scatter plot, and process arrows.

An illustration of stacked material layers: a transparent sheet, two wood planks, a dark wood plank, and a particle board base.

An architectural sketch showing a doorway, a rectangular niche with dimensions, and floating stairs on a concrete wall.

A black and white line drawing depicts three scenes: an automated warehouse system delivers a tote to a person, a person picks an item from a tote, and a person places an item into a box.

A realistic solar panel with wires on a mound against a faint, designer sketch background.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

A metal hoe with a wooden handle rests against a grey pole, surrounded by other poles and water droplets on a light pink surface, in a 2D cartoon style.

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.

An illustration of silver pipes forming a complex U-shaped structure, with a horizontal measurement indicating 20 cm below them.

Black and white line art illustration of a CNC router carving a swirling pattern into wood.

A detailed technical sketch of a rectangular box or cabinet with a single internal shelf, showing various dimensions and measurements with arrows.

2D technical drawing of a trailer hitch cargo rack with dimensions 25", 45", 2", and -.5" labeled.

A technical line drawing illustrating the construction details of a Rouge valley roof, including flashing, jack rafters, and valley rafters.

Whiteboard with a transparent plexiglass barrier above a marker tray, mounted on a grey wall.

A minimalist black and white diagram of a landscape-oriented sheet divided into 8 sections by hatched lines.

A grayscale sketch of three UK electrical plugs inserted into a power strip on a wooden surface.

Diagram of a bolt, lock washer, flat washer, and round sleeve, each labeled.

A 3D isometric sketch of an industrial A-frame structure with chains and caster wheels, set in a workshop.

Cartoon illustration showing a wooden bench transforming into a picnic table with a latch mechanism.

A close-up, photorealistic view of a large metal bolt with a thick washer and nut on a textured dark metal background.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

A technical illustration of a shiny metallic gear and linkage mechanism on a light background.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

Technical drawing of a square panel with dimensions, folded edges, a slot, and a back view.

Close-up of a silver-gray cast metal connector joining two light wooden beams at a right angle, set against a blueprint background.

Three side-by-side simple illustrations of mailboxes with open lids and raised red flags. The first is an outline drawing, the second has a grey interior, and the third is entirely grey.

An illustration of a silver ladder leaning against a wall, forming the hypotenuse of a right triangle with a 70-degree angle at the base.

Simple illustration of an electrical circuit with a 12V power supply and a resistor.

A clear, labeled diagram illustrating the internal wiring of a UK 3-pin electrical plug, showing live, neutral, and earth connections.

A black rectangular prism with a sloped top and cut-outs against a light blue gradient background, minimalist 3D render.

Technical illustration of a corner lamp system with a floor spotlight and a 45-degree mirror reflecting light along the ceiling.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

Illustration of two poles, 50m and 1m tall, 1m apart, with an 80m sagging rope between their tops in a field.

A sketch-style technical drawing of a rectangular box with internal shelves and labeled dimensions.

Close-up of a silver metal adjustable bracket bolted to a wooden post, supporting a horizontal wooden beam under a cloudy sky.

An exploded diagram of a wooden desk with a top, two drawers, and legs, surrounded by various metal bolts and rods, against a light background.

Isometric black and white line drawing of a modern outdoor stage with arches and stairs.

A detailed diagram illustrating the wiring of an electrical plug, showing connections for neutral, live, and earth wires.

A line drawing sketch of a modern bedside sleeper or baby crib with one end slightly lower, on a textured paper background.

Black and white engineering drawing of a 100mm diameter, 10mm high disc with eight 6mm holes, showing top and side views with dimensions.

Gloved hands measure a wooden door with a tape measure to install a new brass lock, with tools on a wooden surface in a photorealistic style.

Isometric technical drawing of a beach volleyball court under construction, showing ground preparation, excavation, and drainage pipes.

A blueprint-style diagram illustrating a mechanical latching system with labeled components including a hook arm, mounting block, cam lock, and optional spring.

Technical illustration of a no-drill surface mounting system with labeled components.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

A detailed blueprint drawing of a metal door, complete with dimensions and labels, on a gridded background.

A technical schematic illustration of a dual-function window blind that incorporates a whiteboard and a projector screen.

Line art drawing of a storage unit with shelves and drawers, in dark red outline on a light background.

Pencil sketch of three toilet cubicles with dimensions 2580mm and 7228mm marked.

A close-up, photorealistic view of a large metal plain washer surrounded by various bolts, nuts, and smaller washers on a dark, textured surface.

A detailed technical illustration of a 1 1/2 inch pipe connecting to a 4-inch pipe with a labeled 90-degree elbow fitting.

A detailed cutaway view of a metal bolt screwed into a nut, with 85% of the non-contact threads highlighted in red.

Five-step illustrated guide for applying edge banding to wood, showing hands using an iron and trimming edges.

A brushed metal L-shaped bracket with dimensions 210mm high, 80mm wide, and 900mm long, shown on a grey background.

Blueprint-style drawing of a gray box with an opening on top, showing multiple views and dimensions on a blue grid.

A photorealistic render of a silver cylindrical metal cage with a grid pattern and three mounting tabs on a reflective surface.