A doctor wearing Equipment Needed -4 Pairs of disposable gloves -(Blue/Purple nitrile X3, Clear Latex X1) -2 N95 respiratory masks -3 Standard Covid Mask -1 pair of Scientific Goggles -3 disposable hair net (Blue) -2 pairs of shoe covers (Blue) -1 pairs of leg covers (Blue) -2 Disposable Hazmat Suits (White-first suit, White with blue lining/taping-second suit) -1 Disposable Apron (Blue) -1 pair of disposable Arm Sleeves (Blue) -1 Roll of Tape (Blue) -1 Pair of Scissors(to create thumb holes in suit arms and shorten apron knot) -1 Alcohol Based Sanitiser(to clean after every step) -1 Disinfectant Wipe(to wipe down gear before doffing) Detailed Donning Protocol Tips, Tricks, and Safety Precautions Tabbing: Always fold the end of the tape back on itself to create a "pull tab" for easier removal during doffing.[2] Masks: If the standard masks don’t fit well enough for a good seal or protect the N95s then twist/flip the ear loops to make the mask tighter. Also after every donning of each mask after the first suit hood is put up use tape to stick together the mask, the hood, the goggles and the face Masks(N95): To begin the molding process, cup the respirator in your hand and position it firmly against your face, ensuring it covers both your nose and chin.[3] While holding the mask in place, use the fingertips of both hands to press down on the metal nose bridge strip.[3] Move your fingers outward from the center of the nose bridge along the metal band to conform the material to Mehr sehen