A modern computer case with a wood grain side panel, a deep gray frame, and a clear glass panel revealing internal PC components.

I want you to create a deep gray color micro ATX Tower. The front portion of the tower which displays the interior of the PC tower that has the micro ATX logic board needs to be glass on the left hand side of the glass portion there is the power button at the bottom to USB type-c ports next to each other horizontally and then above the two USB type ports there will be the two USB type b ports. That section is made from wood grain the power buttons made from that deep gray color and you can see the power symbol. Inside the housing there should be a divider that has a list of fans and then there's a vent vertically that has an inlet to light an ear so the fans can pull an air downward and then push it over the logic board and upward there are fans mounted up in the logic board area at the top and there's vents at the top. Next the far left vent there will be the GPU housing and a GPU housing will be vertically and there's some vents on the side and there's a gap behind the GPU to let the vents out. Next to that you're going to show the back and right side and on the back and right side there's just a panel and there's an extra compartment that has a glass section for a extra GPU but it's not filled and it has vents slightly behind that open gap area vertically that and then there is some vents at the top next to it there should be a hard drive bay that's has like small grid vents at the front and there is like two or three 3.5 hard drive trays and then there's four 2.5 hard Mehr sehen