Erstellen

Studio

New

Hintergrund entfernen

Suchen

Meine Bilder

Auf Pro upgraden

Anmelden

Registrieren

Technical drawing of a bracket showing its dimensions, including overall width, height, depth, hole diameters, and positions.

Technische Spezifikation: Halterung für Masterlift Allgemeine Daten: Material: Stahl oder Aluminium (empfohlen: S235JR oder AlMg3) Materialstärke: 4,0 mm Gesamtbreite: 60,0 mm 1. Vertikaler Schenkel (Frontansicht) Höhe: 55,0 mm Breite: 60,0 mm Bohrung: 1x 8,5 mm Position der Bohrung: Horizontal: Mittig (30,0 mm von der Außenkante) Vertikal: 40,0 mm von der Unterkante (Biegelinie) 2. Horizontaler Schenkel (Draufsicht) Tiefe: 35,0 mm Breite: 60,0 mm Bohrung: 1x 10,5 mm Position der Bohrung: Horizontal: Mittig (30,0 mm von der Außenkante) Abstand: 15,0 mm von der vorderen Außenkante es sol genau wie in der beschreibugn sein Mehr sehen

#technical drawing #engineering

More images like this

Black and white engineering drawing of a 100mm diameter, 10mm high disc with eight 6mm holes, showing top and side views with dimensions.

A neon green AutoCAD-style technical drawing on a black background, showing a rectangular steel mesh panel with dimensions and mounting holes.

Detailed pencil drawing of a suction cup, labeled with its dimensions including 30mm diameter, 11mm height, and an R10 radius.

A white square shape with a small semi-circle attached to the end of each of its four corners, all on a plain grey background.

Illustration of two poles, 50m and 1m tall, 1m apart, with an 80m sagging rope between their tops in a field.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

A technical drawing of a door with dimensions 90 cm wide, 200 cm high, and a slanted bottom from 2.5 cm to 1.7 cm.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

A black line diagram of an isosceles trapezoid with a top base of 12mm, a bottom base of 30mm, and a height of 34mm, on a light background.

A black rectangular prism with a sloped top and cut-outs against a light blue gradient background, minimalist 3D render.

Isometric black and white line drawing of a modern outdoor stage with arches and stairs.

A simple black line drawing of a cylinder on a white background.

Whiteboard with a transparent plexiglass barrier above a marker tray, mounted on a grey wall.

A light gray PVC pipe lies on a matching gray surface, showing its hollow interior.

Photorealistic studio shot of a shiny metal bolt, a split lock washer, and multiple flat washers on a gray background.

An illustration of a silver ladder leaning against a wall, forming the hypotenuse of a right triangle with a 70-degree angle at the base.

Technical drawing comparing iPhone 12 and iPhone 17 Pro, showing dimensions and blueprint style.

A futuristic, modern, minimalistic metallic door handle rendered realistically on a grey background.

Technical drawing of a square panel with dimensions, folded edges, a slot, and a back view.

A technical drawing on grid paper showing the top and side views of a mini golf course layout with dimensions labeled in centimeters. A scale of 1:50 is noted.

A 2D minimalist floor plan of a small attic bedroom with dimensions, an inward-opening door, and a built-in wardrobe.

Technical drawing of a suction cup with dimensions 30mm diameter, 16mm height, and 2mm rim thickness.

A technical line drawing depicting a double busbar switchgear system fed from two transformers.

A technical drawing of a brake rotor showing front, side, and bottom views with various dimensions and labels.

Two white belts, one laid out in a wavy shape and another coiled in a circle, in a clean vector-style illustration on a light grey background.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

An empty white action figure toy box with rounded edges on a white background.

A silver metallic rectangular bar with rounded edges rests on a dark, textured surface.

A close-up, photorealistic shot of a metallic, truncated conical piece with a bore through its axis and two perpendicular grooves.

A black circle with a double outline on a white background.

A minimalist black and white diagram of a landscape-oriented sheet divided into 8 sections by hatched lines.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

A pencil drawing on white paper shows a rectangle labeled 15cm by 7cm next to an unlabeled square, with a pencil resting below.

A detailed sketch of a silver cable organizer with black and blue cables neatly stored inside.

A minimalistic 3D render of a metallic sphere with two black vertical 'eyes' and thin metal rods protruding from its sides.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

2D technical drawing of a trailer hitch cargo rack with dimensions 25", 45", 2", and -.5" labeled.

Pencil sketch of a tube with internal wavy, compressed, and dilated sections, representing peristaltic movement.

A technical line drawing of a vertical post with two support wires, indicating an 80-degree angle between wires, a 65-degree ground angle, and a 12m base.

A sleek, brushed silver metal pencil sharpener with a minimalist design, on a light gray background.

A black circular ring with a white interior and a small hole at the top, on a white background.

Black and white technical sketch of a machine with a square feeder, a hopper, and a long pipe extending right with dimension labels.

Top-down schematic diagram of a classroom layout with a central table, and desks with computers along the left and right walls. A door is in the front-left, and a network rack in the back-right.

Isometric technical drawing of a movable wooden storage shelf on wheels with four rows of open-top bins and two rows of smaller closed bins. Dimensions are shown.

Technical drawing of a bathroom layout showing electrical wiring, a bathtub, sink, washing machine, and measurements.

Pencil sketch of three toilet cubicles with dimensions 2580mm and 7228mm marked.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

Photorealistic isometric view of a clean, metallic industrial conveyor belt with side guards, on a light gray tiled floor, showing a 60cm measurement.

A sleek, brushed dark metal box with rounded corners sits on a dark background, rendered in an isometric view.

A black and white line drawing depicts three scenes: an automated warehouse system delivers a tote to a person, a person picks an item from a tote, and a person places an item into a box.

Isometric industrial design sketch of a white, vertical card reader device with a credit card inserted.

A dark gray 3D cylinder floats within a silver square outline on a dark gray background with subtle reflections.

A technical diagram of a wooden cooling pad enclosure with two fans, a control module, and an adapter connection, showing dimensions and labels.

A photorealistic rendering of a rectangular silver tobacco tin with a black vacuum pump stick and a grommet, on a transparent background.

Technical drawing of a cylindrical plate with multiple holes, showing top and side views with dimensions for diameter, height, and hole size.

A black and white cross-sectional technical drawing of a cylinder liner, showing dimensions labeled D, d, H, and t.

A brushed metal L-shaped bracket with dimensions 210mm high, 80mm wide, and 900mm long, shown on a grey background.

Three side-by-side simple illustrations of mailboxes with open lids and raised red flags. The first is an outline drawing, the second has a grey interior, and the third is entirely grey.

A front-on technical drawing of three grey public toilet cubicles with overhead support beams and dimensions.

An isometric technical drawing shows a cardboard box filled with layers of aluminum discs, resting on a wooden pallet, with dimensions annotated.

A clean line drawing of a clear, square plastic food storage container with a lid.

An illustration of silver pipes forming a complex U-shaped structure, with a horizontal measurement indicating 20 cm below them.

A photorealistic render of a silver cylindrical metal cage with a grid pattern and three mounting tabs on a reflective surface.

Schematic diagram of a wall, 4m wide and 3m tall, with a 2m wide window and wooden planks, displaying dimensions.

Blueprint-style drawing of a gray box with an opening on top, showing multiple views and dimensions on a blue grid.

A simple, minimalist grey speaker icon cube with a sound symbol on one side and a circular speaker on the front, set against a dark grey background.

A minimalist black and white icon featuring a rounded square next to three horizontal lines.

Black and white line art illustration of a CNC router carving a swirling pattern into wood.

A black and white geometric diagram showing the construction of an angle bisector using a compass and straightedge, with points A, B, D, E, F labeled.

A plain black book rests on a white table with sunlit shadows in a soft-focus room.

Simple illustration of an electrical circuit with a 12V power supply and a resistor.

A sketch-style technical drawing of a rectangular box with internal shelves and labeled dimensions.