Studio

Auf Pro upgraden

Registrieren

An isometric exploded-view technical diagram of an adjustable imbalance shaft mechanism with labeled parts.

An exploded-view schematic diagram of an adjustable imbalance shaft mechanism, technical line-art style, clean white background, isometric perspective. In the center is a vertical 4mm steel shaft. Components are exploded from top to bottom along the shaft: 1. Top miniature ball bearing. 2. A sleeve with a high-helix lead screw thread (Steilgewindekupplung). 3. Two movable brass rectangular counterweights (Regelgewichte) mounted firmly on this sleeve. 4. One main brass rectangular counterweight (Hauptgewicht) soldered directly and permanently onto the middle of the shaft (acting as a fixed reference). 5. Bottom miniature ball bearing. Add straight dotted guidelines along the shaft axis. Include a subtle linear arrow showing the sleeve shifting up/down, and a curved rotational arrow showing the two outer weights twisting together relative to the fixed center weight. Minimalist, high contrast, clear educational engineering diagram, components do not overlap. Mehr sehen

#engineering #diagram #mechanics

More images like this

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

Isometric black and white line drawing of a modern outdoor stage with arches and stairs.

A detailed illustration of a metallic double-end stud against a white background, in a sketch-like style.

Technical illustration of a half umbrella canopy with a pulley system and a round pole on a blue background.

Isometric technical drawing of a movable wooden storage shelf on wheels with four rows of open-top bins and two rows of smaller closed bins. Dimensions are shown.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

A black and white line drawing depicts three scenes: an automated warehouse system delivers a tote to a person, a person picks an item from a tote, and a person places an item into a box.

Technical drawing of a roller mechanism with a motor, timing belt, pulleys, and a hinged arm, showing motion arrows.

A detailed sketch of a silver cable organizer with black and blue cables neatly stored inside.

Various metal tools including wrenches, drill bits, and a caliper arranged around a central glowing gear on a dark background.

A metallic screw puzzle or jack on a dark wooden table, lit dramatically.

Isometric technical drawing showing the disassembled components of a rectangular hamster cage.

An illustration of a silver ladder leaning against a wall, forming the hypotenuse of a right triangle with a 70-degree angle at the base.

A 3D render of a wooden timber frame layout with two large audio speakers inside on stands.

A close-up, photorealistic shot of a metallic, truncated conical piece with a bore through its axis and two perpendicular grooves.

A shiny silver six-pointed star-shaped gear or cog with multiple holes, against a light blue and grey gradient background.

Black and white line art illustration of a CNC router carving a swirling pattern into wood.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

Hand-drawn isometric sketch of a Minecraft cauldron with water ripples, a dripstone block above, and a falling water drop.

A technical illustration of a shiny metallic gear and linkage mechanism on a light background.

A silver metallic torsion spring mechanism with a long rod on a clean white background.

A black and white clip art illustration of a wooden guillotine with a sharp blade.

Isometric 3D render of a high-detail railway axle ultrasonic testing system with wheels on rollers and an overhead gantry.

A photorealistic industrial design render of a "Knife-Light Pole" with a clear polycarbonate sleeve and solar panel cap, standing in a tiled urban plaza.

A shiny aluminum tube is mounted perpendicularly on a square metal base plate, set against a concrete background.

An isometric technical drawing shows a cardboard box filled with layers of aluminum discs, resting on a wooden pallet, with dimensions annotated.

A light wood multi-purpose organizer on wheels, featuring key hooks, a clock, tiered shelves, and a hidden compartment with a flip-up lid, on a gray background.

Schematic diagram of a wall, 4m wide and 3m tall, with a 2m wide window and wooden planks, displaying dimensions.

Hand-drawn diagram: an arc arrow goes from A to B. Above, C in a box with 'Die Bewertung macht's' below.

Black and white technical sketch of a machine with a square feeder, a hopper, and a long pipe extending right with dimension labels.

A technical line drawing of a 6-axis FANUC industrial robot arm with a suction cup tool, shown with 3D coordinate axes and dimensions.

Exploded view diagram illustrating the installation order of mechanical parts including flanges, gaskets, and housing components.

An IKEA-style instruction manual showing steps to assemble a large IKEA store sign on a pole.

Exploded view diagram of an alkaline water electrolyzer cell assembly with grey plates, red foam, and a white membrane.

A close-up, photorealistic view of a large metal bolt with a thick washer and nut on a textured dark metal background.

A technical line drawing depicting a double busbar switchgear system fed from two transformers.

A technical drawing of a balcony cross-section with a glass railing, showing structural details and a '10mm' measurement.

A long brown cardboard tube with a transparent plastic window showing several white balls inside, on a white background.

A blueprint style drawing of an aquarium lid with a pin art panel and filter tubes on a blue grid.

A bright yellow safety handrail is bolted securely to the floor in a professional cartoon sketch style.

A hand-drawn geometric diagram depicting a 3D shape with a rectangular base ABCD, a vertical plane, measurements 4, 8, 2"

Isometric technical drawing of a beach volleyball court under construction, showing ground preparation, excavation, and drainage pipes.

A realistic solar panel with wires on a mound against a faint, designer sketch background.

A black rectangular prism with a sloped top and cut-outs against a light blue gradient background, minimalist 3D render.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

Black-and-white line drawing of a prosthetic arm with a quick-swap socket, a drill attachment, and a circular saw blade.

Close-up of a silver double-ended stud on a gray surface.

Black and white engineering drawing of a 100mm diameter, 10mm high disc with eight 6mm holes, showing top and side views with dimensions.

Technical illustration of a no-drill surface mounting system with labeled components.

A technical sketch showing a delivery truck with an open bi-folding rear ramp, accompanied by multiple detailed drawings of the ramp mechanism.

A detailed sketch of a square mahogany live edge table with metal corner accents, featuring prominent wood grain.

A detailed pencil sketch of an abstract, tree-like metal and wood bag holder with glass-like tiles, a brown handbag hangs on one hook.

Detailed diagram of a square taper bicycle bottom bracket with exposed bearings, rendered in a mechanical sketch style.

A dark grey metal plate with diverse laser-cut keyhole and geometric perforations, with some shapes resembling garbled text, stands in a workshop.

A 3D isometric sketch of an industrial A-frame structure with chains and caster wheels, set in a workshop.

Technical drawing of a cylindrical plate with multiple holes, showing top and side views with dimensions for diameter, height, and hole size.

An isometric sketch of a silver galvanized industrial A-frame structure with chains and caster wheels in a workshop.

Isometric exploded diagram of a wooden cupboard, showing its components for assembly.

A technical drawing on grid paper showing the top and side views of a mini golf course layout with dimensions labeled in centimeters. A scale of 1:50 is noted.

Isometric view of an industrial machine with a feeding system, conveyor belt, inspection stations, and discharge, in an engineering drawing style.

A wooden ramp with three gray blocks on the left and one block held by two steel rods and a disk on the right, under a bright light.

A metal hoe with a wooden handle rests against a grey pole, surrounded by other poles and water droplets on a light pink surface, in a 2D cartoon style.

A black and white geometric diagram showing the construction of an angle bisector using a compass and straightedge, with points A, B, D, E, F labeled.

Photorealistic studio shot of a shiny metal bolt, a split lock washer, and multiple flat washers on a gray background.

A 3D render of a drill bit boring vertically through colorful horizontal geological layers in the earth.

An isometric illustration of a green ping pong table with a net and white lines.

Isometric exploded diagram of a cupboard's components (walls, door, handle) on a grid paper background.

A simple black and white line drawing of a flow cytometry diagram, showing cell shapes, a scatter plot, and process arrows.

Technical schematic of a no-drill surface mounting bracket assembly with labeled fixed plates, adjustable bracket, and substrate.

An exploded diagram of a wooden desk with a top, two drawers, and legs, surrounded by various metal bolts and rods, against a light background.

A shiny metallic cylinder with a long row of portholes floats under a clear blue sky.

Black and white line drawing of a 1/4 inch TRS phone plug on a white background.