Design Specs: 4' x 36" Reverse Flow Smoker (Self-Feeding) 1. Main Cooking Chamber Dimensions: 48" Long x 36" Diameter Pipe (1/4" Steel). Reverse Flow Baffle: 1/4" Plate welded air-tight to the sides. Baffle Gap: 7.5" gap at the far end (opposite the firebox) for smoke to "turn." Drainage: 1" NPT grease drain at the lowest point, sloped away from firebox. Stack: 6" Diameter, ~40" tall. Collect smoke at grate level (same side as firebox). 2. Gravity-Fed Firebox (Self-Feeding) Dimensions: 24" x 24" x 24" (1/4" Steel). Internal Chute: 12" x 12" vertical sleeve centered or toward the back. Burn Zone: Bottom 6"–8" of the chute where fuel meets the grate. The Grate: 1/2" rebar or heavy expanded metal, 6" above the firebox floor. Loading Lid: Must be 100% air-tight with a high-temp gasket and toggle clamps. Ash Pit: Sealed lower chamber for ash collection and fan mounting. 3. Airflow & Forced Air (Forced Air Setup) Fan Intake: 2" NPT nipple mounted to the ash pit (below the grate). Fan Spec: 50–75 CFM variable speed blower controlled by PID. Throat Opening: ~110–120 sq. in. crescent opening leading under the baffle plate. Fueling: Mix 4" wood chunks with lump charcoal in the chute for a 12+ hour burn. 4. Critical Measurements Checklist Grate Height: 2" above the 36" pipe centerline. Baffle Slope: 1/2" drop toward the drain for easy cleanup. Chute Taper: Slight 1° outward taper at the bottom of the chute to prevent fuel "bridging." Insulation (Optional): Mehr sehen