Studio

Auf Pro upgraden

Registrieren

Isometric 3D cutaway of a brick shaft with three shiny metal exhaust pipes, labeled with dimensions 3.5m, 1.5m, 4m.

Plano arquitectónico en 3D de un patinillo técnico de ladrillo visto (3.5m alto, 4m ancho, 1.5m profundidad) para salida de humos de restaurante. Corte isométrico limpio en 3D sobre fondo blanco. En el interior hay tres tuberías de acero inoxidable brillante de 25 cm de diámetro. Una tubería sube completamente recta y cruza el techo superior. Las otras dos tuberías suben, se desvían suavemente hacia el lateral haciendo una curva con codos a 45 grados y vuelven a subir verticalmente por el exterior hasta quedar exactamente al mismo nivel y altura que la tubería recta que atraviesa el techo. Render de ingeniería industrial detallado, iluminación de estudio clara. Mehr sehen

#architecture #engineering #technical diagram

More images like this

Detailed cutaway illustration of an underground valve well with a pipe, valve, electrical box, and manhole cover in a grassy setting.

Isometric view of a building section with an electrical equipment room on the left and a classroom on the right, featuring exposed pipes and electrical panels on concrete walls, and wooden desks with glass partitions in the classroom.

A blueprint with a 60mm tall by 40mm wide rectangle divided into three sections, with a circle above and below. Dimensions are labeled.

Exploded view diagram of an alkaline water electrolyzer cell assembly with grey plates, red foam, and a white membrane.

Detailed diagram of a brick veneer facade wall section showing bricks, insulation, and anchors.

Top-down view of a bathroom layout with a sink, toilet, and shower, showing dimensions of 125 cm width and 245 cm length.

A transparent concrete planter showcasing steel reinforcement bars inside, on a neutral background in a realistic style.

A stylized hydrogen electrolyzer stands on a green grassy field under a bright blue sky with white clouds.

Isometric black and white line drawing of a modern outdoor stage with arches and stairs.

A neon green AutoCAD-style technical drawing on a black background, showing a rectangular steel mesh panel with dimensions and mounting holes.

Shiny silver utility duct cladding pipes on a dark surface in a blurred industrial setting.

Technical drawing of a bathroom layout showing electrical wiring, a bathtub, sink, washing machine, and measurements.

Photorealistic split-screen: left shows clean water in a smooth pipe, right shows murky water and sludge buildup in a blocked pipe.

Educational illustration of a city street cutaway showing underground layers, a leaking pipe, and subsidence beneath pedestrians, buildings, and a parked car.

A light gray PVC pipe lies on a matching gray surface, showing its hollow interior.

A detailed sketch of a silver cable organizer with black and blue cables neatly stored inside.

A cross-section engineering illustration of an underground valve well, showing a blue valve on a pipe inside concrete walls with a 2m depth.

Isometric technical drawing showing the disassembled components of a rectangular hamster cage.

An isometric architectural visualization of a modern, two-story steel-frame cube house with a greenhouse on the bottom floor and a minimalist living space on the top.

A brushed metal L-shaped bracket with dimensions 210mm high, 80mm wide, and 900mm long, shown on a grey background.

A 2D minimalist floor plan of a small attic bedroom with dimensions, an inward-opening door, and a built-in wardrobe.

A white radiator is mounted on a light gray wall, with two rows of small, illuminated fans on its front panel blowing warm air upwards and outwards. The floor is light wood.

Diagram of a pool wall with a ladder, a chair, and dimensions in cm, in a clean, illustrative style.

Photorealistic brutalist concrete wall with three circular openings in a lush green garden with a potted plant, hose, and trees.

Black and white technical sketch of a machine with a square feeder, a hopper, and a long pipe extending right with dimension labels.

A pencil sketch of a mechanical diagram showing a beam connected to a vertical support by a pin, with dimensions 4.0 m and an angle of 20 degrees labeled.

Exploded view diagram illustrating the installation order of mechanical parts including flanges, gaskets, and housing components.

Photorealistic isometric view of a clean, metallic industrial conveyor belt with side guards, on a light gray tiled floor, showing a 60cm measurement.

A large, metallic gravity separator with pipes and valves in an industrial setting, rendered photorealistically.

Isometric technical illustration of a single-pipe heating system with a boiler, main pipe, three radiators, and a return pipe.

A dark cuboid object on a yellow transportation cradle, resting on rails inside a spacious industrial warehouse.

A partly constructed brick wall with visible mortar and a cavity, set against a blue wall with metal support beams above.

Technical illustration of a vertical PVC pipe air filter with zeolite granules, a mesh screen, and a 5V USB fan, showing airflow and dimensions.

A multi-layered metal frame of a house under construction, with a concrete foundation, set in a grassy field under a blue sky.

Modern aluminum fence, linear drainage grate, and gray square pavers against a deep blue background.

An isometric illustration of an enclosed, multi-level broiler chicken farm with an electronic control panel, surveillance camera, feeders, and water lines, with dimensions labeled.

A technical drawing on grid paper showing the top and side views of a mini golf course layout with dimensions labeled in centimeters. A scale of 1:50 is noted.

Isometric 3D render of a high-detail railway axle ultrasonic testing system with wheels on rollers and an overhead gantry.

A technical drawing of a transparent cube enclosure with dimensions 5m by 5m by 3.5m, featuring an air-hose vent and anchor-ready foundation.

Grayscale technical drawing of a metal water pipe with 1-inch diameter and 22.5 cm length dimensions.

A shiny aluminum tube is mounted perpendicularly on a square metal base plate, set against a concrete background.

A modern, minimalistic bathroom with light grey tiled walls, a white wall-mounted toilet, and a sleek sink with a faucet.

Isometric technical drawing of a movable wooden storage shelf on wheels with four rows of open-top bins and two rows of smaller closed bins. Dimensions are shown.

A modern parasol base with wood panels and a metal frame, sitting on a tiled patio with strips of green grass.

A detailed scientific illustration of a solar thermal energy storage system, with a cutaway showing internal components, next to a building.

Sketch of a residential plumbing plan showing a toilet, shower, and sink with waste pipes and sizes leading to a sewer.

Photorealistic image of a large metallic industrial heat exchanger or processing unit with gauges and valves, set in a factory.

A black and white cross-sectional technical drawing of a cylinder liner, showing dimensions labeled D, d, H, and t.

A detailed technical illustration of an extruder system with a piston, lever, and sample flow, on a white background.

An instructional diagram shows a person in a face shield and gloves unloading biochar from a horizontal retort kiln into bins. Labels indicate cooling and finished product.

A 3D render of a straight asphalt road with a deep trench down the middle, flanked by streetlights and a single traffic cone.

A collection of various metal industrial profiles including tubes, angle steels, channel steels, and I-beams on a white background.

A futuristic metallic light fixture with glowing vertical panels hangs from a grimy ceiling in an industrial or sci-fi building interior.

An isometric sketch of a corner room featuring a wooden paneled wall with a hinged door and a cinder block wall with a sliding glass door. Dimensions are marked on the floor.

An illustration of silver pipes forming a complex U-shaped structure, with a horizontal measurement indicating 20 cm below them.

A photorealistic industrial design render of a "Knife-Light Pole" with a clear polycarbonate sleeve and solar panel cap, standing in a tiled urban plaza.

A technical line drawing depicting a double busbar switchgear system fed from two transformers.

A technical drawing of a door with dimensions 90 cm wide, 200 cm high, and a slanted bottom from 2.5 cm to 1.7 cm.

Technical drawing of a cylindrical plate with multiple holes, showing top and side views with dimensions for diameter, height, and hole size.

Illustration of two poles, 50m and 1m tall, 1m apart, with an 80m sagging rope between their tops in a field.

Pencil sketch of three toilet cubicles with dimensions 2580mm and 7228mm marked.

Architectural technical drawing of a bathroom layout and elevations with shower, toilet, bidet, sink, and door, including dimensions.

A photorealistic render of a silver cylindrical metal cage with a grid pattern and three mounting tabs on a reflective surface.

A technical diagram of a black fence with wire mesh and slatted panels, showing dimensions for height and length, with trees in the background.

An isometric 3D render of miniature workers in a transparent glass enclosure installing an air conditioner on a grassy floor.

Aerial view of two modern tiny houses with wooden facades and solar panels, joined at a corner in a green field with wildflowers.

Black and white engineering drawing of a 100mm diameter, 10mm high disc with eight 6mm holes, showing top and side views with dimensions.

A front-on technical drawing of three grey public toilet cubicles with overhead support beams and dimensions.

A male technician in blue overalls and a cap works on a control panel with gauges and pipes in a well-lit industrial room, photorealistic style.

An isometric technical drawing shows a cardboard box filled with layers of aluminum discs, resting on a wooden pallet, with dimensions annotated.

A grey PVC pipe elbow against a blurred industrial background.

A partly constructed red brick wall with a silver metal support beam extends into a blue office background.